Check starter wiring for loose nuts, bad connetion. n what not. clean up terminals if needed n see if it turns over if not. check for power coming frm the yellow wire, or the smaller one. with the key held in start position, in no power you will need a starter solinoid. if you do have power go grab a starter n put it in,
How to Reset the CHANGE ENGINE OIL Message
1. With the ignition key in RUN but the engine off,
fully push and release the accelerator pedal slowly
three times within five seconds.
2. Turn the key to OFF.
If the CHANGE ENGINE OIL message comes
back on, the engine oil life monitor has not reset.
Repeat the procedure.
You can also download a PDF version of your owner's manual for free.
2000 Pontiac Montana Owner's Manual
234 views
Usually answered in minutes!
×