At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 2010 VW Jetta. The turn signal indicator light on the driver side view mirror is broken. I have removed the mirror and tried to release the two plastic clips on the mirror houseing to remove it, but it seems as if force is needed and and don't want to break the plastic housing. What is my next step?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 8:16
https://www.youtube.com/watch?v=Bmm9M28dqv4
Mar 10, 2014 - Uploaded by bimmermerchant
BMW 540i Side View Mirror Removal 525i 530i. bimmermerchant ..... A truck recently side swiped my ...
? 2:31
https://www.youtube.com/watch?v=uUcpzHx2ZR0
Jan 6, 2013 - Uploaded by AutoandTruckMirrors
This How To video offers you easy step by step instructions on how to remove and replace a broken side ...
? 13:58
https://www.youtube.com/watch?v=ldjeQsnAJ9M
Jan 26, 2014 - Uploaded by Daniel Scheer
This video is a step by step instruction for the removal andreplacement of the side mirror on a 1996-2007 ...
? 3:00
https://www.youtube.com/watch?v=saIEH-CxRkY
Aug 10, 2014 - Uploaded by DIY Mechanics
VW Golf MK4 - how to remove/replace door wing mirror video ... How To install Replace Side rear View ...
If light is on all the time and not blinking take apart the turn signal on the side of car that the light is on . Both front anr rear remove the bulb and look for corrosion . If you find it clean it off of contacts if you cant remove ithe corrosion you may have to replace fixture. .Once cleaned it should solve your problem. if this was helpful please leave good feedback.
SECTION 501-09: Rear View Mirrors
2002 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION
Exterior Mirror Glass
Removal NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.
NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar. All mirrors
Position the glass in the full up position.
Locate the notch at the bottom of the exterior mirror glass.
Release the exterior mirror glass.
Insert a long flat-bladed screwdriver in the notch.
Push the screwdriver into the notch until the glass is released.
Heated mirrors
Position aside the exterior mirror glass.
Disconnect the electrical connectors.
All mirrors
Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation Heated mirrors
Connect the electrical connectors.
All mirrors
Position the exterior mirror glass on the exterior mirror motor.
Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.
Very difficult. You have to open the inside access door on the drivers side, remove the amp and wheel well cover, pinch the tabs and the bulb cluster will release. The taillight assembly is bolted from inside of the car, so it can't be done outside.
are you trting to tighten the mirror glass or the mirror where it attaches to the body? I don't think glass is removable in 99. Only can try to press on glass to seat if unseated. not too hard.
Remove the front door trim panel; refer to Section 501-05 .
go to car-part.com for a used mirror. Page with * is cheapest seller.
Remove the speaker.
Remove the screws.
Disconnect the electrical connector.
Remove the speaker.
Remove the outside rear view mirror (17682).
Disconnect the power mirror wiring clips.
Remove the outside rear view mirror nuts.
Remove the outside rear view mirror.
Feed the power mirror wiring through the opening in the front door (20124).
------------------------------------------------------
----------------------------
SECTION 501-09: Rear View Mirrors
2001 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION
Exterior Mirror Glass, 2001 model
Removal NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001. NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar. All mirrors
Position the glass in the full up position.
Locate the notch at the bottom of the exterior mirror glass.
Release the exterior mirror glass.
Insert a long flat-bladed screwdriver in the notch.
Push the screwdriver into the notch until the glass is released.
Heated mirrors
Position aside the exterior mirror glass.
Disconnect the electrical connectors.
All mirrors
Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation Heated mirrors
Connect the electrical connectors.
All mirrors
Position the exterior mirror glass on the exterior mirror motor.
Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.
×