Question about 2008 Mercury Mariner

3 Answers

Need to obtain master keypad code for 2008 mercury mariner. Do not have the plastic card. Any other place to look for this code?

Posted by jmpllcp on


3 Answers


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

Pry up the chrome ring around the shifter.
Lift up the console lid and pull out the black container.
Pull up the center console from the cup holder end, it is held down with snap in clips.
The code is on the top-right corner of a white sticker upside down.
More Info:

Posted on Dec 08, 2012



  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 869 Answers

You need to provide VIN number either to Ford or to your dealer directly. it'll be a piece of cake there after.

Posted on Dec 28, 2010


Paul Dalton

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer got voted for 20 times.

  • Contributor
  • 361 Answers

Sometimes the code is behind the glovebox.

Posted on Nov 30, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2008 mercury mariner stalls imedeitly after it starts. The anti theft light never stops flashing. HELP!!

You need to see what DTC - diagnostic trouble code is stored . Then have it diagnosed . Ford dealer , mobile lock smith . That's your best option ! 2004 Ford Explorer PATS Key Theft Light Issues

Oct 13, 2016 | 2008 Mercury Mariner

1 Answer

STalling out with acceleration

Possible MAF sensor or loss of fuel pressure due to a failing fuel pump is best guess. I would really need to drive it to be sure and run some tests

Feb 14, 2016 | 2008 Mercury Mariner

1 Answer

Need to change code on door key pad

  • Enter the five-digit code programmed into the keypad from the factory. Find the key code in the card stored in the glove box of your Mariner.
  • Press the "1-2" button on the keypad immediately after inputting the factory code.
  • Enter the five-digit key code you wish to store for your keyless entry system within five seconds of pressing the "1-2" button.

  • Read more :

    Jul 05, 2015 | 2008 Mercury Mariner

    1 Answer

    2008 mercury mariner awd rsc service now light came on with the abs whay do i do?

    Have the ABS codes read. Could be a speed sensor at the wheel.

    Oct 04, 2014 | 2008 Mercury Mariner

    2 Answers

    I recently purchased a 2008 Mercury Mariner which had the keyless entry key pad on the outside of the drivers door. I was not given the code for entry so I need to reset the code. Can you tell me how to...

    You need to have the code that came for that vehicle. There are 2 places that you can look to find the code. Sometimes you can find a sticker in the back tailgate area it will be white and most of the time it is on the right (passengers) side. The other place you may be able to located is in under the hood most of the time it's on the drivers side firewall by the brake master cylinder. It will be a metal plate with 5 numbers on it like the sticker will have in the back if one is there. I hope this helps and good luck.

    Mar 25, 2011 | 2008 Mercury Mariner Hybrid

    2 Answers

    What is the factory code for my 2008 mariner keyless pad? I lost the card. Need to reset

    The dealer can get that for you. We would not have your code unless the card was in my hand to give out to you. Codes are issued to the first time buyers only and no body else. The dealer keeps records and so does the corporate offic. They can easily get that code for you

    Jan 24, 2010 | 2008 Mercury Mariner

    1 Answer

    I need the keypad code for my 05 mercury mariner.

    First check inside the owners manual, sometimes the original owner will write it there. If not then you will have to take it to a mercury dealer they can recode it for you. Good luck. Dont forget to rate.

    Mar 13, 2009 | 2005 Mercury Mariner

    Not finding what you are looking for?
    2008 Mercury Mariner Logo

    916 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    gerry bissi

    Level 3 Expert

    4388 Answers


    Level 3 Expert

    85239 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides