Hi buddy,
Would suggest ya to try some online manuals.. if u know a good website then go ahead or otherwise try reliable-store.com
It's great for automobile repair and the people are also very helpful..
All the best:)
Hello, on my Dodge ram 1500 5.7 l of 2005, I changed my differential and the bearings of the rear deck as well as the shafts of wheels. Since that moment, I no longer have a speedometer and an error code p0500, p0700 is detected. there was no connection on the bridge or abs. Can you help me please ? Thank you
Causes
A P0501 DTC trouble code may be caused by one or more of the following:
Possible Solutions
The simplest thing to do is to reset the code and see if it comes back.
Next, check all wiring and connectors that lead to the speed sensor. The location
of the sensor depends on your vehicle. The sensor could be on the rear axle,
transmission, or perhaps the wheel hub (brake) assembly.
If the wiring and connectors are OK, then check the voltage at the speed sensor.
Again, the exact procedure wil depend on your make and model of vehicle.
If everything looks OK, replace the sensor.
Further Reading
Vehicle
Speed Sensor (VSS) Description and Operati
3,145 views
Usually answered in minutes!
×