Hello, you can get a free scan at Autozone and Oreillys to name a few places that do courtesy work. Once you get a diagnosis you can buy their parts or go to a Repair shop.
You will need to have the on-board computer cleared when you finish a repair. Its best to use a scanner to do this and if you return to Autozone they will clear it for you.
Using a scanner is the first thing a Mechanic would do to start a repair. If you want to verify a defect Code you can contact this site or go with their information. Make a mental note of the symptoms as some Codes have multiple causes.
The information below was complied by me, it explains what causes the check engine light to come on and the process of finding the cause.
When the Check Engine light (or Service Engine Soon) is turned on, the systems computer control unit (called the PCM) has sensed a fault in the electronic controls of the engine and/or the emission system. When this happens you will seldom feel the car engine run any different. There are about 200 possible system faults (the gas cap is just one of them) that turn the Check Engine light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen/Oriley and Autozone parts stores (USA only) do this testing for free.
39 views
Usually answered in minutes!
×