At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Possible faulty crank sensor or idle speed controller, fuel pump relay, or ignition module. Get a data scan and see what's sensor might out of range or defective. Check for clogged fuel filter also.
I have a 1992 /98 0lds the air condition will not work unless I take the ground wire lose then it kicks in but it show that makes car is over heating when it is not what sencer is doing this please help [email protected] it is hot in texas
Some TPS Sensors are adjustable. Usually held on by two screws, loosen the two screws slightly to twist the sensor either counter clockwise or clockwise. You should be using a scanner when installing a new TPS so you can visually see the values. If there is no adjustment on this particular one you may just have a bed new TPS. Make sure after replacing you clear codes/disconnect battery for 10 minutes and reconnect.
×