Brake pad change for 99 daewoo nubira cdx

I also have a 99 nubira, you should be able to do it with out a book...............they have disc all round and the general set up is the same front and back, If i remember rightly, wheel off, unbolt caliper from mount ( 2 bolts on back face ) pads simply pull off from bottom of mount, refit new pads ensuring same shape on as one that came off. open bonnet and take off cap to brake fluid, using suitable tool ( i used a large screw driver ) push both pistons back into rubber gaitor ( keeping a eye on level in brake fluid, as it will possibly overflow ). You should then be able to refit caliper back to mount. refit bolts, mop up any overflow and replace cap.........JOB DONE :) ........................remember, before you go out onto the road start the car and pump the foot brake a few times until the pedal goes firm again.

Hope this helps you. steve