I have a 2001 VW Jetta 1.8T. The check engine light came up and the codes that came up were P0171 (System too lean, meaning there is too much oxygen in the exhaust). And P0411 (Secondary air injection incorrect flow). Is it bad on my car if I drive it around until I get it fixed?

Fuel Air sensor is the most likely cause, but can be other things.

P1151 Error Code ' VW Vortex - Volkswagen Forum

https://www.vwvortex.com > ... > Golf IV & Jetta IV
Aug 6, 2014 - Can't pass my emissions inspection with my check engine light on. Code is P1151. Possible causes: MAF Sensor, O2 Sensor, Vacuum leak.
Missing: DOC ‎' Must include: DOC

pm151: i hve 2003 jeta VR6..engine light..fuel air - JustAnswer

https://www.justanswer.com > ... > Volkswagen Questions
Sept 11, 2009 - I have 2003 Jetta VR6 and the engine light is on and have a code reading of P1151 fuel air managing how can I trouble - Answered by a ...
1 answer · 17559/P1151/004433 - Long Term Fuel Trim Additive Air; Bank 1; Range 1: System too Lean The ECM is trying to compensate for an excessively lean mixture. ...

2001 Jetta GLS VR6 CEL Code P1151 ' VW Forum

https://www.vwforum.com > ... > MK4
Jul 5, 2009 - error code P1151 "bank1,Long Term Fuel Trim, Range 1 leanness Lower Limit Exceeded". Explanation - fuel pressure or volume. Probable cause
Missing: 2.8 ‎DOC

p1151 code My 2001 vw jetta glx vr6 has a p1151 code. What

https://www.fixya.com > ... > Volkswagen
Nov 16, 2019 - p1151 code My 2001 vw jetta glx vr6 has a p1151 code. What is the problem I need to fix? - Volkswagen Cars & Trucks question.
I m geting an engine alarm and the code is P1151 . - Fixya
Nov 19, 2019
2003 Jetta GLI throwing P1151 Indicating a lean condition
Sept 2, 2019
SOLVED: I need the Serpentine belt diagram for a 2009 - Fixya
Apr 17, 2021
I need torque specs 14B coaster bus.cyl head and - Fixya
Apr 14, 2017
More results from www.fixya.com Missing: DOC ‎' Must include: DOC

2001 Jetta GLS VR6 CEL Code P1151 - Volkswagen Forum

https://volkswagenforum.com > forum > 2001-jetta-gls-...
error code P1151 "bank1,Long Term Fuel Trim, Range 1 leanness Lower Limit Exceeded". Explanation - fuel pressure or volume. Probable cause. Check engine for ...
Missing: GLX ‎2.8 ‎DOC

P1151 code and white smoke on idle - The VR6 Owners Club

https://www.vr6oc.com > ... > Newbies Corner
Mar 14, 2020 - Hi, i just recently bought a 2002 vw jetta vr6 24v with 123000 miles on it. Car runs good and sounds healthy but just here recently ive been ...

P0171 - System Too Lean Bank 1 Share
1 ' Add Comment Possible causes
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
What does this mean? Tech notes
If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replaced the air filter and clean the air flow meter. If the problem persist the front oxygen (O2) sensor may need to be replaced.
What does this mean? When is the code detected?
- Fuel injection system does not operate properly.
- The amount of mixture ratio compensation is too small. (The mixture ratio is too lean.)
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Excessive Fuel Consumption
P0171 Description
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. The Engine Control Module (ECM) calculates the necessary compensation to correct the offset between the actual and the theoretical ratios.
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the Malfunction Indicator Light (MIL) (2 trip detection logic).
Read more: http://www.autocodes.com/p0171.html#ixzz3t65yA9xI

p0171 = fuel system too lean, this means vacuum leak or faulty oxygen sensor

p0303 = cylinder 3 misfire

p0325 = knock sensor malfunction.

p0303 and p0325 - i can see these working together, if a cylinder misfires, it will cause the knock sensor to trip. I would lean towards the coil and or ignition module, along with a faulty oxygen sensor.

DTC P0171 - System Too Lean (Bank 1)
Basically this means that an oxygen sensor in bank 1 detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1.

Note: This DTC (Diagnostic Trouble Code) is very similar to P0174, and in fact your vehicle may show both codes at the same time.

I would suggest that you take a look at the front oxygen sensor. Typically speaking the oxygen sensor causes this code to appear. Here is the possible cause list from the manual for your car.

Trouble Code: P0171 (2.5L V6 Auto) - Fuel System Lean (Bank 1)

Possible Causes:
Air leaks in intake manifold, exhaust pipes or exhaust manifold
Base engine mechanical problem causing a lean A/F condition
Fuel control Sensor is out of calibration (e.g., ECT, IAT or MAP)
Fuel delivery component fault (clogged filter, low fuel pressure)
O2 element is contaminated, deteriorated or it has failed
Vacuum hose is disconnected, broken, leaking or loose

Hope this helps (remember to rating this answer ans leave us a testimonial comment). Thank you for using FixYa.

System Too Lean (Bank 1)

Basically this means that an oxygen sensor in bank 1 detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1.
Note: This DTC is very similar to P0174, and in fact your vehicle may show both codes at the same time.

P0411 Secondary Air Injection System Incorrect Flow Detected, check the...Combination valve
...Secondary Air Injection pump motor
...Secondary Air Injection solenoid valve
I would take it to a mechanic

P0171 indicates a lean condition. The most common cause of this is a defective mass air flow sensor. Also check if any vacuum leaks. P0174 OBD-II Trouble Code

Technical Description

System Too Lean (Bank 2)

What does that mean?

Basically this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exhaust.

Note: This DTC is very similar to P0171, and in fact your vehicle may show both codes at the same time.

-----------

Thanks.

P0171=System Too Lean Bank 1,
not cylinder 1,it means the oxygen sensor on the drivers side exhaust was stuck on lean and set a code.
doesn't mean you need to change the oxygen sensor yet,first clear the code and see if it corrected its self.

P1684=The battery has been disconnected within the last 50 starts

P0171=System Too Lean Bank 1,this is an oxygen sensor

P0171 System too Lean (Bank 1)
P0174 System too Lean (Bank 2)

If a car has a check engine light on and has P0171 and P0174 codes stored, the most likely cause is a vacuum leak. These codes are set by the car’s computer when it sees too much oxygen in the exhaust. Excessive oxygen readings in the exhaust will set lean codes. This does not mean that the oxygen sensors are defective. It is a common mistake for people to replace oxygen sensors when lean codes are present. Just because the code is related to oxygen sensor readings, it doesn’t mean that the oxygen sensors are bad. If both of these codes are stored this means that both banks of the engine have excessive oxygen in the exhaust. If the oxygen sensors are replaced it’s most likely that the same codes will reappear. It is very uncommon for two oxygen sensors to fail at the same time.

Therefore the most likely cause of P0171 and P0174 codes is a vacuum leak. The source of a vacuum leak can be one of many things. The most common cause of a vacuum leak is a leaky hose. Vacuum hoses over time can become dry and brittle. The rubber deteriorates and can leak causing a vacuum loss. Many times a leaky vacuum hose can be found by listening for a hissing sound. A large vacuum leak can even make the car run rough at idle. In some cases it will not idle without feathering the gas pedal.

System Too Lean (Bank 1).Not enough fuel .Try changing the fuel filter.Also get fuel pressure checked.