Question about 2003 Hyundai Tiburon
If your car has a manual transmission, it is probably the clutch getting ready to burn our
Posted on Nov 15, 2010
Tips for a great answer:
Oct 28, 2016 | 2003 Hyundai Tiburon GT V6
Dec 16, 2014 | Hyundai Motor 2000 Tiburon
Apr 08, 2013 | 2003 Hyundai Tiburon
Nov 03, 2012 | 2003 Hyundai Tiburon
Physically look in the radiator under the cap when cool, for coolant level, and check the valve in the cap for sticking. If air is present in the radiator it can't get out, and more coolant can't get in,(from the overflow). Either clean the cap or replace it and check that it is the CORRECT cap.
Radiator fins dirty, clean with a strong stream of water, not high pressure water.
Radiator clogged, try backflushing it, or replace.
Thermostat stuck open or shut, replace it.
Water pump worn out, can no longer move enough coolant, replace it.
Fan shroud broken or missing....
Electric Fan(s) not working, Check the fan, relay, fuse and engine temperature sensor's.
Belt driven fan, belt slipping, fan clutch is bad, fan blades have flattened out.
Air dam under front bumper is gone, loose, or broken. It actually has a purpose other than scraping on the driveway or curbs. It forces air up into and thru the condenser and radiator. If it's loose, airflow can actually push it out of place making it useless or blocking the airflow. Along with that, there may also be a plastic piece attached to the bottom of, and wraps up behind the bumper. If it's loose, airflow can actually push it out of place blocking the airflow. Simply reattach it with 4 or 5 screws.
Also, if the vehicle has A/C and electric fans, one fan is dedicated to the A/C and should come on almost the instant the A/C is turned on. The engine fan will run even with the key off, that is normal. The system is trying to cool itself. Hope this helps.
Aug 26, 2011 | 2003 Hyundai Tiburon
Aug 07, 2010 | 2003 Hyundai Tiburon
Aug 11, 2009 | Hyundai Motor 2002 Sonata
Mar 28, 2009 | 2003 Hyundai Tiburon
336 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: