Saab 93 engine fault codes p1230 and p1260 ?

Please read about the code at the Saab forum at the provided link.
http://www.saabcentral.com/forums/showthread.php?t=241616

Scroll down to about half way point for information on fault code

It's gone into "limp home mode"

code p1105 refers to manifold absolute pressure(MAP) sensor, TC system-leak detected. causes ---intake leak, ---hoses There are to references to p1105 The second response is still map sensor but the causes are---TC system--mechanical fault--air leak between throttle body-TC,map sensor---TC system--exhaust blockage
code p1260 refers to throttle return spring--weak spring force. causes ---mechanical fault,--,throttle control unit
code p1264 refers to throttle valve opening-accelerator released causes ---throttle control unit---mechanical fault

You should check out www.reliable-store.com they have info on repair, service, wiring diagram, electrical diagram, fuse diagram, torque specs,
troubleshooting, PCV, gear box, owner's/service/repair/parts manual, fault codes, error codes, etc everything on all vehicles. must check it out

sounds like you might have a problem with your throttle body. mine went bad and had similar symptoms. i had to replace.

Have the oil pressure checked to make sure that the light is correct,or change the oil sending unit.

No you can't.Internal damage will be done to the engine.Sorry to tell you this.

your ecu went to limp mode. try to your saab dealer to have reprogram

Hi,If you press and hold the reset button on the SID unit the message will go out ,however it might come back on a few times so you may have to repeat this for a couple of days till it stays out.

Is there black smoke coming from the exhaust?