I have a 95 Saturn. The tape deck is stuck and I want to open it up to disable it. I lifted off the front panel, and I am trying to figure out how to get a access to the radio.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
remove the little cosmetic piece of the mirror inside the car, remove the door pull, remove the opener lever disconnecting the snaps holding the mechanism to the rods. get a tool and go around the edges and bottom loosening the snaps. open the window and lift the door panel up and out. replace the speakers. put the panel back on in reverse order. install the pull and the cosmetic piece. go get drunk. wake up the next day and with a set of needle nose pliers attempt to hook those snaps back onto the rods and reinstall the opener lever mechanism.
Start by removing the front door rear view mirror interior cosmetic piece. Remove the 3 large nuts holding the mirror on and take it off the car. Lift the door handle up and push the two small handle retaining pins out, take off the door handle. Unscrew all the bolts holding the door panel onto the frame, special driver needed. Lift the door panel up and away from the door. Reinstall in reverse order. If you are doing a back door, omit the mirror part.
go to ebay motors and search your year make model then service repair manual obtain a cd repair manual it has extensive wiring schematics and electrical component locator in it along with repair procedures and illustrations for about $20.00
did you ever figure out how to get your lift gate open? im having the same problem with my durango. i couldnt get the panel off so like a ****** i cut a hole in the panel so i could see the latch completely and i when i try to open it manually i can see the components moving but it is still acting permanently locked and will not open. Its so frustrating. Help!?!?!?
unscrew arm rest if crank windows remove window crank remove door panel held in by clips lift back and up to remove panel from window lip lay to side if power windows/ locks careful of wires window and track will b visible if slid off lower horiz track check track/rollers for damage if regulator repair or replace
You need to take out the cassette deck from the car. open the cassette deck by removing the various screws, once open, there is a small plastic gear which you need to wind manually which will slowly release the cassette.
hey it could be a pro with railroad track. try to spray a rust aerosol there move it back and foreword the other thought is electrical pro in this case i suggest to take it to the closer auto-electrician.
×