I need a manual for my 2006 ford mustang - Mustang Ford Cars & Trucks

'Reset' as in disconnect the battery for a couple of hours? No that will cause a whole heap of other issues. This explains

https://www.fixya.com/cars/r29912554-changing_battery_not_create_problems

Check all the fuses for radio and windows first.

2006 Ford Mustang fuse box diagram

StartMyCar https://www.startmycar.com > Mustang > Fuse box

Type No. Description Fuse FMX/JCase 1 Not used Fuse FMX/JCase. 30A 2 Climate control blower Fuse FMX/JCase. 40A 3 Cooling fan View 58 more rows

Ford Mustang (2005-2009) fuses and relays

Fuse-Box.info https://fuse-box.info > ford > ford-mustang-2005-200...

Here you will find fuse box diagrams of Ford Mustang 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, ...

..

Question moved from Washing Machines.

Check Fuse 14 before you start ripping wiring out.

Ford Mustang (2005-2009) fuses and relays

https://fuse-box.info > ford > ford-mustang-2005-2009...
Here you will find fuse box diagrams of Ford Mustang 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, ...

..

there a section in the owners manual that speaks to warning lights, what causes them and what to do about there after.

Go to page 164:

http://www.scribd.com/doc/20065401/2006-Ford-Mustang-Owners-Manual

Since this trips to prevent fuel from pumping in a collision, it is made to be manually reset. The device on a son's Ford used to trip occasionally on our rough easement. On his car it was located behind a panel in the trunk.

You need to remove the transmission. My recommendation is to buy a Haynes workshop Manual and read the how to remove and replace clutch. It isn't a hard job but you will need to lift the car off the ground so as to access the gearbox, drive-shaft etc;
Good luck

The fuse diagram is usually located on the fuse panel cover.......Hope this helps.

What aboout the brakes do you need replacing? Just the pads or pads and rotors? I will help you work this out just let me know if you get stuck. Picture manuals are only as good as the mechanic taking the picture, i however need no manual to assist you.

You need to have it scanned to see what code turned on the light. Check your gas cap, make sure it is tight.

Try http://alldatadiy.com/ this is a great site. You can buy a 1 year subscription for your car. As a shop owner I have around 25 subscriptions for different cars. I don't use it everyday but when I need it, it sure comes in handy for specs, locations, wiring diagrams etc. Give it a look.