Question about 2002 Isuzu Rodeo
SOURCE: Where is the obd port
Here is a photo of the obd connector on a 1993 Isuzu Trooper.
The connector is on the transmission hump about 6 inches from the accelerator pedal. It is inside a black hood. Right next to the white OBD connector is an identical green connector that I have not tested.
The OBD port is a white 3 hole plug. Right next to it in the photo is a green 3 hole plug that I believe is for automatic transmission diagnostics. The plug is different from other plugs under the dash as it will not accept a .25" tab connector.
The picture shows a 20 ohm resistor being used to short pin 1 and 3 of the white plug. The resistor is to prevent a melted wire in case the plug shorted is the wrong plug.
To read the error codes from the engine computer, the mechanic is supposed to short pin 1 and pin 3 of the OBD port plug. Then the mechanic turns on the ignition switch and counts flashes of the "check engine" light to determine the error values being reported.
Posted on Sep 20, 2009
I have a v6 2000 rodeo and the transmission contiunes to have a slip in it what should I do!! I have been having this problem since I purchased the car brand new in Oct 2000!! What should I do
Posted on Jan 18, 2010
Tips for a great answer:
Jan 12, 2017 | Isuzu Cars & Trucks
Oct 30, 2015 | 2002 Isuzu Rodeo
Sep 07, 2010 | 1997 Isuzu Rodeo
Mar 14, 2010 | 2002 Isuzu Rodeo
Jan 19, 2010 | 1991 Isuzu Rodeo
Apr 21, 2009 | 1999 Isuzu Rodeo
Jan 23, 2009 | Isuzu Rodeo Cars & Trucks
79 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: