Need the timing marks on a 1989 mazda 929 v6 mainly the cam shaft pulleys

Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...

4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l

4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement

Its gonna ve obviuos if u didnt do the timing right symptoms eratic engine shake or it boggs to make sure use of timing gun some of the newer engine doesnt have a mark on the main pulley so u need to check the mark on the cam shaft, main shaft im sure they all have mark on them

Here is a complete Write up Guide for it

Hope this helps

Positive Feedback ALWAYS Appreciated :)

My apologies for the delayed response. I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it either way.

CLICK on the following LINK. It has the Timing Mark(s) Diagrams you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1989/make/mazda/model/929/1989_mazda_929_timing_belt_diagram_marks.htm

the timing marks are located on the gear/pulley system. the crank pulley and the cam shaft pulley.

12 o clock straight up, should be a mark, the dowel pin on the cam should be straight up also

check aboutauto.com they might have it

Here is a diagram Good Luck contact if you need more help. Thanks for using FIX YA http://www.2carpros.com/car_repair_information/tec_info/1989/mazda/929/1989_mazda_929_timing_belt_diagram_marks.htm

Hicksashley,

When you look at the engine on the pulley end you must find a triangular pointer on the main pulley and then look at the two or four cam pulleys for a dot like dent on the fin of the pulley. These are marks for timing, firstly you set the main pulley with the timing mark on the pulley to the triangular mark on the engine just above the pulley to the right or to the left, then you put both cam mark facing each other on the insides level with the top of the block. that it you should be able to start her up if your plug timing is in order,