Question about 2003 Volvo XC70

1 Answer

What is the torgue setting for volvo v70 hub bearing?

Posted by floors944 on


1 Answer

Dave C

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,050 Answers

Here's what Volvo says:

What is the   torgue setting for volvo v70 hub - 57ee033.jpg

Posted on Sep 14, 2010


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you replace front bearings on volvo v70?

Remove the Hubs from the Axle and take them to a Shop with a Press.

Apr 25, 2014 | 2001 Volvo V70

1 Answer


Most likely causes:
Front wheel hubs need replaced (do both at one time)
Front rotors warped or worn (change rotors and pads both wheels together)

The noise from the brakes dragging or the wheel bearings humming gets picked up by the abs sensors in the hubs before you can hear them. A few hundred miles later, the problem will get worse enough to hear while driving. Wheel hub replacement best done on a lift with an enormous impact wrench. 23952739-za4bqvjhdrn3arnyccyp5xaz-2-0.jpg

Apr 01, 2014 | 1998 Volvo V70

1 Answer

Torque specs wheel bearing 2007 jeep compass

Hi Cynthia, I'm glad to help! The torgue specs for the HUB BEARINGs on your Compass are 181 foot pounds. Hope this helps and have an awesome day Cynthia.

Dec 31, 2013 | 2007 Jeep Compass 2.4

1 Answer


brake rotors could be worn out.could have loose worn wheel bearings.could have worn tie rod ends or worn ball joints.

Oct 14, 2012 | 2003 Volvo V70

1 Answer

I have 2 questions...1. I have a 2001 Volvo V70 wagon automatic that hesitates before going into 1st gear. 2. I am hearing a noise that seems to be coming from my left front wheel. Maybe wheel bearings?...

hesitation is probably down to gearbox fluid being low bearings can be a nightmare but in best case u just need to take the hub off and get the bearings pressed out. if u take the hub off yourself and take it to sum were to get pressed u looking at an hours labor and w/e the bearings cost if they come out easily

Mar 05, 2010 | 2001 Volvo V70

1 Answer

Vibration through seat at 70mph - VOLVO V70 auto

CV joints and wheel bearings can also cause this.

Nov 19, 2009 | 2000 Volvo V70

1 Answer

New control arms rub on the inside of the Rims. Replaced balljoint and Control arms. Model V70 2.4 A SR

try getting wheel shims to change the offset of the tire to hub. should not be more then 1/4". your local tire shop should be able to get them. or your local parts store.

Aug 14, 2009 | 2001 Volvo V70

1 Answer

1998 volvo v70 heater comes on for 3 seconds then knocks off with lights flashing heater motor seems to sound funny

check under the filter.. maybe some stuff in there that's slowing down the motor and setting off the slow speed sender unit..or could be bad bearing or brush on motor.
try to move it and listen for scraping or clicking noise - bad bearing...

stuff, as in you would never believe me if I told you.

Jul 04, 2009 | 1998 Volvo V70

1 Answer

Whiney noise as i drive Volvo V70, even when i turn the car off

this sounds like the bearing in the thermostatic cooling fan has worn possibly lift bonnet with car started keep hands out and look for a fan on the front of the radiator the are usually black plastic and are easily replaced and become noisy when worn hope this is helpful glenn....

Nov 23, 2008 | 2002 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides