How do i fit a towbar to a landrover discovery 2

http://www.ebay.com/sch/items/?_nkw=93+landrover+discovery+service+manual&_sacat=&_ex_kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=&_fpos=&_fspt=1&_sadis=&LH_CAds=&satitle=93+landrover+discovery+service+manual Click on link to view service manuals.

Hi,

Can you confirm what brand the stereo is? If it is the Visteon brand that Landrover fit then I can help. Just let me know.

Thanks.

Remove the 2 bolts holding the grab handle ( 10mm) Remove the screw holding the pull handle plastic cover and remove the cover. Use a fork and pry the panel away from the door and you will be able to pull it off. Before refitting, check all of the plastic clips that hold the panel to the door, some will have broken off. Remove them and fit them back on to the trim panel and glue them on. Refit is reverse as removal. Hope that helps

Hi, kindly get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__r45t

Guys with questions on brakes scare me. They are the single most important system on any car. On the discovery the caliper must be removed by removing a brake pipe and therefore openeing the hydraulics, If the system is not bled properly, the brakes will be compromised.

if it is a mems unit , it will need to be programed to the key fob and alarm . (there is no way round it).

Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees

its the capasator needs replacing you blew it up.

black socket, black 7 core wire
pin 1 yellow left indicator
pin 2 blue, rear fog light
pin 3 white earth
pin 4 green right indicator
pin 5 brown right side/tail light
pin 6 red brake lights
pin 7 black left side/tail light

Grey socket grey 7 core wiring
pin 1 yellow, reverse
pin 2 blue, supplementary feed (ignition)
pin 3 white, earth
pin 4 green live feed (battery +)
pin 5 brown not connected
pin 6 red supplementary feed (ignition)
Pin 7 black earth

On the discovery there is a purpose made plug behind the panel on the drivers side rear, behind the rear lamp
i think the relay you have bought is for lamp failure you just need a normal 4 pin 30 amp relay.
Good luck Davelee

Here you go...