Question about 2002 Chrysler Sebring

1 Answer

2003 chrysler sebring overheating checked water pump compresson test whats wrong with my car

Posted by mswhiskey3 on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 454 Answers

Hello mswhiskey3 and thank you for asking your question, on Fixya.

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your 2002 Chrysler Sebring, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people like you. So here is the link to:
How to diagnose your overheated 2002 Chrysler Sebring

Anyways if that helps you any little bit, then feel free to follow me on Twitter. That one is at:

Thanks for the vote, and good luck!

Posted on Dec 27, 2010


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2002 Chrysler Sebring is leaking water, what cause this.

if possible have a pressure test done to pinpoint leak if not well it can be multi problems you need to narrow down location of leak then check hoses and clamps -if water pump look for leak in area of weep hole and around bottom --same with radiator -heater core--reservoir

Sep 08, 2016 | 2002 Chrysler Sebring

2 Answers

Sebring overheating 2.7 V 6

This is hard to say without a test. The test is going to be a pressure test of the coolant system. You hook up a cap that has a pump and guage on it and pump the pressure up to the rating on the original cap. Then you watch for leaks. If it was head gasket, you would most likely get coolant in the oil, white smoke (steam in the exhaust) or bubbles in the radiator. If it was the water pump you would have coolant dripping out of the "weep hole" on the pump shaft.

Apr 28, 2014 | 2003 Chrysler Sebring

1 Answer

How do I replace the water pump on a 2003 Chrysler Sebring Convertible with 2.7 liter engine?

Dont try this at home. Get a shop to replace it and check the timing chain components. If its not done right, bent valves wil be your New Years present. I recommend this.

Dec 30, 2009 | 2003 Chrysler Sebring

2 Answers

2003 chrysler sebring is hesitating whn at higher

(Fuel filter will not effect anything, it only prevents build up in engine)
Could be one of these-
Oxygen sensor
fuel sensor
Dirty injectors
Bad injector/injectors

~~~~Go to car zone/ or a frendly auto part store, and ask them for a FREE electronic computer check ( where they check the computer, and the computer tell them whats wrong)

Sep 28, 2009 | 2003 Chrysler Sebring

2 Answers

Sebring 2003 2.4l Coolant reservoir emptied

Fill the coolant system back-up to level and pressure test the system. Check for chalky, white trails, antifreeze trails, spots on the ground, and see that the pressure is holding for more then five minutes. Could be: head-gasket, freeze plug, hose, heater core, water-pump, or radiator.

Jun 11, 2009 | 2002 Chrysler Sebring

2 Answers

I have a 2003 chrysler sebring was running good and suddenly died

Check for Fuel Pressure @ Test Port if it Does not SPRAY Fuel Pump is Bad

May 31, 2009 | 2003 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

1,414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides