Please tell me what tools i need to change my timming chain on my 97 monte carlo

How can you tell if you're timing chain need to be replaced?? On my 2002 Monte just keep turning

OK so the problem is the timing chain and gear set. factory timing gears are nylon coated, so wear out in time. the eratic idle indicates wandering timing, controlled by timing gear set. suggest new ones that do not have nylon gears.

is it a z34 3.4l, if so sell the car, it is not worth the price to repair, that is an interferance motor meaning if it broke you have bent valves, if it is a 3.1l pull the balancer and then the front cover and replace the chain

you need to buy haynes repair manual it will show you the camshaft sprocket and crankshaft sprocket timing marks and manual will show and tell you how to remove timing chain.you need lots of tool and a engine light support engine you have to remove oil pan so bottom part timing cover will seal correctly if you dont remove oil pan bottom timing cover seal will be in a bind you will have oil leak.

remove the valve cover and have someone crank it over seen more crank sensors go bad then chains but i don't know your mileage

you may need to take the throttle body off. you will need 10 and 13mm wrenches, sockets. .

someone broke my hazard switch now my blinkers dont work what do i need to replace on my 97 monte carlo ????

u have to take steering wheel apart,,unless u need them for inspection,,get a haynes repair book it is like twenty dolls,,,,it will tell u,,& what tools u will need,it is part of your directional switch,,,,

it has a timing chain . if you have a double over head cam you have a timing belt.... either one can be done with engine in car... you remove passenger tire and the plastic cover inside wheel well ..then you can get to the bolts

timming chain or distributer cap coil and rotor button