HI, I need to know the torque sequence and camshaft specification for Daewoo Lanos SE 1.6 1999. Does someone help me? Thank You.. ****

Tighten the cylinder head bolts to 25 Nm (18 ft.Adjust the bolts to 70 degrees plus 70 degrees plus 30 degrees using the angular torque gauge KM-470-B.Sep 19, 2009

Looking for torque spec on my 2002 Daewoo Lanos head bolts

and diagrams as well

https://www.google.com/search?q=daewoo+lanos+head+tightening+specifications

..

1. Tighten cylinder head bolts to 25 N.m (18 ft. lbs.). Tighten bolts an additional 70 degrees plus 70 degrees plus 30 degrees using angular torque gauge .

Hello! Please tell me what you mean by replace a bolt? Are you asking for a particular torque specification?

Guru......Saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Hope this helps.Fire order 1-3-4-2

WHAT ARE YOU TORQUEING.

18 ftpound then 70 deg then 70 deg ,30deg start from midle out

is that for the 1.5 lt engine

cam sensor is called the optical sensor and is located in the distributer

the 2000 daewoo lanos 1.6L dohc head torque is as follows , step 1 = 18 ft. lbs. , step 2 = 70 degrees , step 3 = 70 degrees , step 4 = 30 degrees . sequence is as pictured .



there ya go , gears to the left , looking at the front of engine .

2001 Daewoo Lanos Cylinder Head Bolt Torque Specs
Torque bolts in sequence
(looking down on the engine from front of car)

belts 1 3 9 5 7 trans
belts 2 4 10 6 8 trans

Step 1: 18 ft.lbs. (25 Nm)
Step 2: Plus 60 degrees
Step 3: Plus 60 degrees
Step 4: Plus 60 degrees
Step 5: Plus 10 degrees