My malfunction indicator light came on yesterday and won't go off what could be the problem? 2007 Chrysler Sebring

Chrysler Sebring 2007 2009 Service repair manual Download


for the easy solution download the pdf file

You will need to have the electronic engine control module scanned for fault codes, there will be a code even if thelight is not on.

Call a tow truck and have it taken to a dealer. There is nothing you can do here, special tools ande a trianed expert are required to diagnose a problem like this.

Do you have a check engine light on ? Common problem with Chrysler is the crank sensor, won way to check is with a scanner, connect to dlc, and goin to live data stream and watch your rpm if you have no signal while cranking that's your problem,another possible cause could be your anti theft system , is your security light blinking ,staying on or not coming on at all?

CODE PO685 - ASD RELAY CONTROL CIRCUIT MALFUNCTION.

Shifter was broken. Still under warranty, so dealer replaced. Works fine. According to a dealer service person trying to assist this is not an uncommon problem with Chrysler/Dodge products.

2007 Chrysler Sebring 4-Cyl. 2.4 L
Automotive V-Ribbed Belt (Standard)


2007 Chrysler Sebring V-6 2.7 L
Automotive V-Ribbed Belt (Standard)



2007 Chrysler Sebring V-6 3.5 L
Automotive V-Ribbed Belt (Standard)



I hope you with this. Good luck (remember rated this help)..

It could be many things. The airbags has it's own computer, so any malfunction in the system and it will shut off, turning on the light. The only way is to find someone will diagnostic equipment for SRS.

how do i get the brake light out of my 2007 Chrysler sebring????

Have the car scanned at AutoZone for codes in the computer (it's free - a dealer will charge you). Post the codes here and I can help you. There are a ton of things that could cause the problem you have - the codes are essential to figuring out the problem.