I have lost my lexus remote control key. how and where can i buy a new one through the net. thank you..

Hi,

Please check the amazon and best buy websites for the remote. If not available, then you can reach out the Muskoka directly via phone and request a vendor who sells the remote.

Thank you.

You can buy remotes from the service dealer and they will program it to your car and immobiliser . It is costly but quicker in the long run

Cheapest alternative to purchase a "new" remote key fob is on eBay. Search for "remote key fob, 2004 Trailblazer". Check and/or inquire about programing instructions.

they made the new key and you called they flashed it for that new key so car will not recognize old key in ignition get another key from they if you want another key to start car ok. I have a 04 Lexus RX 330 and that how each key has different functions.

Sorry to hear about your situation. You need to check you battery connections to make sure that everything is connected correctly. If you have the key, keep experimenting with the battery to see if you get anything out of it. You could also call a repair shop.

If you lost the only key you had, then go to the Lexus dealer. You have to show them a picture ID, and the car ownership (TITLE). Is going to cost you, so it is a good idea to call them upfront.
Another option is buying a key blank transponder chip on line at:
http://www.autotransponder.com/2003_lexus_lx470_key_blank_transponder_chip_2

2003 LEXUS LX470 Key blank (Transponder Key) must be cut and programmed before it will work for your vehicle. Cutting and programming can be performed at an automotive locksmith shop or your local dealership. There are no onboard programming instructions available for 2003 LEXUS LX470 chip key. Only a professional with special tools can make it work for your vehicle.
Or at:
https://www.ikeyless.com/vehicles/Lexus/LX-470/2003

You need to bring the VIN (Vehicle Identification Number) to a Lexus dealer, where they will check that against a stolen car database, and ensure you receive the correct key. This key usually has an internal transponder-computer chip to match the vehicle. Not inexpensive but there's pretty much no way around this.

Hope this helps.

did the lock smith cut key with resister in in maybee not gotta go to dealer get one cut then put old key in start car then turn of remove key put new key in turn on till security light goes out then start car

try this:

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.
2. Insert key into the ignition (DO NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.
4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.
5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.
7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.
8. Repeat steps 5, 6 and 7 for additional remotes.

Dear Customer,

If you didn't change your remote kit than its a best way to take to your dealer ,there is minor problem with sequence so they wil do free of cost with car document.

THNX