At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 1992 jeep cherokee sport 6cyl. it sat for 6 years, and i have replaced the gas tank an fuel pump. i have had to try 2 different O-ring seals. I left for 2 weeks and when i returned and tried to start it , the fuel pump is now not powering on. I have checked the pump itself, and it works fine. I have switched the relays on the fuse block, and its not a relay either. there is no power coming to the pump at the wires that plug into the pump.im gonna check the backside of the fuse block tomorrow. if that if that proves to be good , does anyone have any other suggestion
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I replaced the fuel pump in a 1995 Jeep Cherokee Sport without having to remove the gas tank. Maybe you can too in your '98 Grand Cher. If your fuel pump is accessed from the upper front of the gas tank-above the rear differential-then you should be able to remove the pump with the tank in place. It was easy on that jeep of my son's, took only about an hour or two.
DescriptionON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 4.0L ENGINES, THE CRANKSHAFT POSITION SENSOR WIRING INSULATION MAY CRACK AND EXPOSE THE WIRE.
ConsequenceIN THE PRESENCE OF MOISTURE, THIS COULD RESULT IN SENSOR MALFUNCTION, WHICH COULD CAUSE THE ENGINE TO STALL, INCREASING THE RISK OF A CRASH.
RemedyDEALERS WILL REPLACE THE CRANKSHAFT POSITION SENSOR. OWNER NOTIFICATION BEGAN ON MARCH 29, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Check Fuel pump seal at top of tank. Check carbon canister to see if it full of fuel and or carbon. You will have to disconnect the hoses to it and tip it upside down. Plugged evap hoses from tank to engine. Leaking fuel injector.
TO REPLACE SPARK PLUGS YOU REMOVE COIL PACK MOUNTING BOLTS THEN REMOVE THE COIL PACK WITH BOOT OVER THE SPARK PLUG.YOU HAVE 6 INDIVIDUAL COIL PACK TO EACH CYLINDER. YOU NEED A 3/8 RATCHET WRENCH - LONG 3/8 EXTENSION -SPARK PLUG SOCKET - SPARK PLUG GAUGE.AND TORQUE WRENCH.THE 2000 MODEL JEEPS FUEL FILTER INSIDE THE TANK.1993 - 1996 MODEL JEEPS FUEL FILTER LOCATED LEFT SIDE OF THE VECHICLE NEAR THE FUEL TANK.
×