3-13 Degrees
Application:
With manual transmission
Note :
Before top dead center, at specified curb idle speed.
Locate data link connector & connect jumper wire
between ground & engine test terminals.
After completing adjustment, remove jumper wire.
Curb idle speed (750 RPM) transmission in drive.
3-13 Degrees
Application:
With automatic transmission
Note :
Before top dead center, at specified curb idle speed.
Locate data link connector & connector jumper
wire between ground & engine test terminals.
After completing adjustment, remove jumper wire.
When adjusting idle speed, set parking
brake & chock drive wheels.
Curb idle speed (750 RPM) transmission in neutral
SOURCE: How do I set timing marks -2001 kia Rio
Click on the following free, direct Link. It has all the Timing Belt Diagrams you will need, complete with Instructional and Directional Diagrams to set your Timing.
Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2001/make/kia/model/rio/2001_kia_rio_timing_belt_diagram_marks.htm
SOURCE: timing marks for kia rio 2002 1.5l
Turn crankshaft so that timing marks on belt pulley are aligned with marks on engine . The 'I' on intake pulley is on top and the 'E' on exhaust pulley is also on top.Align crankshaft pulley with mark on engine.If your timing belt is broken then major damage to the engine has occored and kiss it good bye.
SOURCE: kia rio 2001 has no current to fuel pump engine cramks ok
Try replacing or swapping fuel pump relay its in the main fuse box close to the battery
SOURCE: kia rio 2001 thermostat
Fallow the "UPPER" Radiator Hose from the Radiator to the Engine Cylinder Head, The Thermostat Housing is the Unit that the UPPER Radiator Hose Connects to. Theres is 1 BOLT (TOP) & 1 NUT (BOTTOM) that you Remove to Gain Access to the Thermostat itself. Hoping this Helps you out There . Have A Great Day.
897 views
Usually answered in minutes!
×