Question about 2000 Chevrolet Malibu

2 Answers

Need torque specs for 2000 chevy malibu 3.1 cyl heads & intake

Posted by kissirs on

Ad

2 Answers

carl

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,640 Answers

(step 1 ) the torque specs for the heads are---1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1-- 62 in-lbs, step 2--115 in-lbs. intake manifold bolts/studs ( upper ) 18 ft-lbs. this is for the 3.1 v-6, have a good day!

Posted on Oct 01, 2010

Ad

Juan Barriga

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I don't think that the specs for the upper intake is 16 ft lbs for 2000 Chevy Malibu. I replaced the intake gaskets and while performing the torque for the upper intake, it broke from the ends where the bolts are tightened.

Posted on Oct 05, 2011

  • someone_like
    someone_like Aug 23, 2012

    I did the same thing... I'm not sure if this is accurate. I've broken to of them so far with this information....

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specification for 1995 ford Taurus


4 Cyl Intake manifold bolts to heads = 15 to 23 Ft-lbs
6 Cyl 3.0L Step 1 = 11, step 2 = 21
6 Cyl 3.8L Step 1 = 7, step 2 = 15 & step 3 = 24 Ft-lbs
Tighten the bolts in secuence from center to out, alternating sides (front & rear); reaching the specified torque in several stages. I hope this helps. Take care.

May 25, 2014 | 1995 Ford Taurus

1 Answer

Redoing head gaskets on 2003 Chevy Malibu. Can't


you can call Auto Zone or go to their web site and get the right specs,I've always use their web site www.Autozone.com.

Oct 31, 2012 | Cars & Trucks

2 Answers

Rocker arm torque specs on a 2001 chevy malibu 3.1


Rocker arm torque specs for the bolts are 14 Nm (124 inch lbs.)

Apr 15, 2011 | 2001 Chevrolet Malibu

1 Answer

Cylinder head bolt torque specs for 2000 Cadillac catera 3.0L 6 cyl


YOU NEED NEW HEAD BOLTS OLD HEAD BOLTS BEEN STRETCHED. YOU HAVE TORQUE HEAD BOLTS IN FIVE PASSES. FIRST PASS TORQUE HEAD BOLTS 18 FT LBS. SECOND PASS ADD ADDITIONAL 90 DEGREES.THIRD PASS ADD ADDITIONAL 90 DEGREES.FOURTH PASS ADD ADDITIONAL 90 DEGREES.FIFTH PASS ADD 15 DEGREES.

Dec 22, 2010 | 2000 Cadillac Catera

1 Answer

I AM DOING THE HEAD GASKET ON 1999 SAAB 95 4 CYL I NEED THE TORQUE SPEC ON CYL. HEAD


Torque spec

Step 1- 44 Ft.Lbs.
Step 2- 59 Ft.Lbs.
Step 3- Tighten bolts an additional 90 degrees.

Here the head bolt's tightening sequence.

bcas1298_1.gif

Nov 11, 2010 | Saab 9 5 Cars & Trucks

1 Answer

I need the engine torque specs for 99 chevy malibu. like the head bolt torque sequence and rocker bolt torque sequence


99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in. lbs.

Mar 12, 2010 | 1999 Chevrolet Malibu

3 Answers

Need head bolt, intake manifold, and exhaust torque specs


Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks

Mar 06, 2010 | GMC Suburban Cars & Trucks

1 Answer

What are the torque specs for intake and head for a 1992 c 1500 chevy silverado. I need to know the torque specs for intake and head for my engine


For 1988-1995 4.3L,5.0L and 5.7L intake manifold bolts are torqued to 35ft.lbs.Start with center bolts on each side moving out finishing with the bolts in the front of the motor and the back

Oct 24, 2009 | 1992 Chevrolet C1500

1 Answer

I need torque specs for a 2004 chevy aveo front hub. installing new rotors


torque specs. to a 2001 chevrolet malibu 3.1 engine with also needing head and manifold torque specs. as well.

Jul 18, 2008 | Chevrolet Aveo Cars & Trucks

Not finding what you are looking for?
2000 Chevrolet Malibu Logo

4,141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...