I have a 2007 Nissan Sentra S - 2.0 model. Where and How to install the cabin air filter???

How To Install Replace Dust and Pollen Cabin Air Filter ...

? 3:02
https://www.youtube.com/watch?v=xfMfd9eDc5k
Sep 25, 2012 - Uploaded by 1A Auto Parts
http://www.1aauto.com/1A/CabinAirFilters/Nissan/Sentra/1ACAF00133 1A Auto shows you how to repair ...

Cabin air filter replacement- Nissan Maxima - YouTube

? 5:22
https://www.youtube.com/watch?v=_WgA8IYcaxU
Jul 19, 2011 - Uploaded by filterheads
Purchase this filter at: http://www.filterheads.com/AQ1093C AQ1093C This filter fits Nissan Maxima 00-03. The ...

Cabin air filter replacement- Nissan Versa - YouTube

This particular model does not come equipped with a Cabin Air Filter.

Hello , if you in fact have the cabin filtration filter system , it is located behind the glove box. Open the glove box door and squeez the two top outer edges together and the door will drop. You should see a plastic cover that has screws and may be marked with ( filter ) on it. unscrew required screws and slide filter out. I would verify with the dealer through a vin# check if your car has this. Nissan tried to get me to replace mine years ago for 130.00 bucks , i said no because I dont have that. He wanted to argue with me. Thank you , Quinn

Should only take about 15 minutes to change the cabin air filter. Nissan did in fact provide a location behind the glove box. Remove the glove box by releasing the two pins at the bottom. Then using a phillips screw driver remove the black cover and this will give access to the filter slot.

Your car has a coil on plug ignition system. So, you would replace the spark plugs, air filter, cabin air filter and PCV Valve. There are no spark plug wires, distributor cap or rotor and the fuel filter is in the tank, not requiring replacement for the life of the vehicle.

lOOK BEHIND THE GLOVE COMPARTMENT. Compartmet is probabily plastic and all you have to do is push in real hard to get them past dash board.

I'm going to send you exploded view of the glove box and the in cabin micro filter cover illustration. Remove the two upper screws on the glove box and carefully pry metal clips loose.
Disconnect glove box lamp electrical connector. Do not let glove box assembly hang from glove box lamp harness.
Remove three lower screws and remove damper clip from glove box door. Separate glove box housing and passenger instrument lower panel.
Remove three screws and remove in cabin micro filter cover.
Remove in cabin micro filters from front heater and cooling unit assembly.
Note When installing two new in cabin micro filters ensure that the filters are facing in the direction indicated by the direction arrow for the airflow. Direction arrow is printed on side of in cabin micro filters.
Install in cabin micro filter cover. Reinstall glove box.

Yes it probably will, but i can't tell you where it is either. Do you have a manual? Another thing you should check is your AC rad. Be sure it's not obstructed with bugs or dirt. If it's plugged... it's not going to work. I always have a screen in front of the rad on anything i own.

If you haven't figured it out yet, try the two links below. They have pics and diagrams. I haven't done this yet but, Nissan suggesting to have it done. (Sitting in the dealer having oil changed as we speak. They want $90 to replace the 2 filters.) I'm planning on doing it myself to save about $70. Doesn't look too difficult - just a little time. Parts are about $22 at local parts store. hope this helps. (Won't be back on this forum. So won't see any response you submit back).

http://www.clubfrontier.org/forums/f23/cabin-air-filter-replacement-29892/

http://www.nissanhelp.com/diy/altima/projects/nissan_altima_in_cabin_filter_replacement_procedure_1.htm