Here I have the Step by Step :
Wheel and tire assembly
Brake caliper and secure it out of the way with a piece of mechanic-s wire. Do not let the caliper hang on the hose.
Brake rotor
Halfshaft retaining nut and discard it
Cotter pin and castellated nut from the tie rod end and separate the tie rod end from the steering knuckle using a suitable removal tool. Discard the cotter pin.
Separate the tie rod end from the wheel knuckle
ABS sensor bolt and the sensor, if equipped
Strut mounting nuts and the studs which attach the strut assembly to the steering knuckle
Strut from the steering knuckle
Lower ball joint pinch bolt. Carefully pry down on the lower control arm to separate the ball joint stud from the steering knuckle.
Wheel hub, knuckle and bearing assembly from the vehicle
Please Rate, Thank you
188 views
Usually answered in minutes!
×