Vacuum leak on that bank due to damaged/loose connection of a vacuum hose to sensors or intake gasket on that side being the worst.
Could be your fuel and air mixer moduel. Hope this helps.
The mass air flow sensor could be dirty, or the oxygen sensor, the one closer to the exhaust manifold ( referred to as the upstream sensor) may be faulty. It's just screwed into the exhaust pipe, some are hard to get at.
The mass air flow sensor is in that black air intake tube that goes from the the air breather to the throttle body. The best thing to use to clean it, is a spray can of electronic cleaner.
If that doesn't cure the problem, then change the 02 sensor (oxygen sensor).
542 views
Usually answered in minutes!
×