How do i replace serpentine belt on 1991 wrangler yj with a 6 cylinder

SOURCE: Belt replacements

Hi Saul,

I've got an '86 Cherokee Laredo 2.6L and a '91 Wrangler too. It's got a 4.0L inline six cylinder. But it has a serpentine belt.

Comment me back and tell me which components will be attached to the belt in question. That way I can tell you which of them gets used to install the belt.

You will need a socket set and a pry bar for the procedure.
Let me know
Mike

SOURCE: i can't take off or put on a new serpentine belt on 91 yj

you need to loosen the alternator bolts then turn the bolt under the alternator to relieve tension on the belt

SOURCE: replace serpentine belt for 6 cylinder 4wd

Loosen the power steering pump rear mounting bolts, pivot bolt and lock nut and then loosen the power steering pump adjusting bolt. Slip the belt on and tighten the adjusting bolt until you can push the belt in about one inch midway between the A/C and alternator pulleys. Then tighten the lock nut, pivot bolt and mounting bolts and that's it.

It helps to diagrams to go with the instructions. Get yourself factory service manual, promanuals.net has them for around 20$ or so.

SOURCE: replacing serpentine belt on 2000 chevy van need belt diagram

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

I am assuming this "van" is a Chevy Venture?
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/venture/2000_chevrolet_venture_drive_belt_routing_diagram.htm

SOURCE: How do you remove the

Hi Alex,

They are a pain the first time. There is a deceptively easy trick to it. I wrote out the step by step for taking it off / putting it on.

Click here for the trick

Hope you find it helpful

Mike