Th e engine hesition sometime went going up hill run good
Most likely you have a bad COP (Coil On Plug) .
Maybe more than one. Very common ford problem for last 12 years.
If you get a MIL Light on the dash (the wrench),check for a PO300 Code.
A PO304 would be coil #4,PO306 #6 Etc.
Cyl 1 thru 4 on pass side
Cyl 5 thru 8 on driver side,front to back
Also hills cause a hi engine vacuum and thus a possible EGR Valve going bad. You can unplug the vacuum lines and plug, to diagnose that issue.
Also leave the EGR disconnected if your working on coil issues. Just note the MIL light will stay on all the time,and remember to check your 300 codes if you feel a hesitaton or miss.
383 views
Usually answered in minutes!
×