At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity.
Question moved to model category.
You may if you wish, try to pull the left side of the bezel out a few inches and reach behind it. You will have to pull it out because the way the headlight switch is clipped in, you have to press some tabs inward and it will release outward. You can unplug the dimmer switch and the headlight switch after its free. Jan 19, 2010
First the front plastic cowl has to be removed.After the front plastic cowl is removed you will see two metal brackets .This brackets can be seen at the rear of each headlight.To see how the metal clips looks see the fig below The metal clpis are circled for its location.
Now you will have to pry up this clips so the headlight assembly gets space to come out.You can use a screwdriver or ratchet handle to pry the metal brackets.See fig below for help:---
when the metal bracket/clip comes out .this is what it looks like.
The headlight is loose and you can remove the headlight .
This will help.Thanks.Helpmech.
No tools needed for this task, just unlock the 3 tabs under the hood for headlight access panel and pull out. Unscrew the nut at the wiring from behind the headlight. Carefully pull the wire and bulb out of the housing. Pull up on the 2 L-shaped tabs and remove the lens cover. Reverse the steps to reinstall.
From the engine compartment, unlock the 3 tabs that are over the headlight housing area. Remove the cover and unscrew the plastic ring that has the wires protruding from it. Carefully pulls the light fixture out of the housing. Pull the 2 L-shaped tabs up and remove the lens section. Reverse the steps to re-install the headlight. If replacing the full turn signal housing, unscrew 2 screws from each light , disconnect bulb wiring and remove. Replace accordingly.
no tool is needed.Just pull up on the l-shaped metal tabs that hold the plastic "screws" in place then take the tabs off then remove the headlight assembly.
They are changed from within the engine compartment... at the rear of the headlight bazels... if it's the side on the battery you may have to remove it.... also don't touch the bulbs with your fingers as that shortens the life of them.
×