At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Why do think the key security is bad? If you still have a factory key, this is not the problem...if no factory key, you can take your VIN number or original key to GM dealer to get new key that they will program for you...Check for dirty battery connections:)
Call a Chevy dealership, ask for service department. Tell them about it and ask what you have to do to get the code. Also if it is n9ot a code then they may be able to help you out by giving you some suggestions, other than bringing it in to them.
i would say when the person broke into your car they set off the security system which stops the car from starting, the way to reset the security is to put your key into the ignition turn the key until all the dash lights come on and let them stay on about 15 minutes after the 15 minutes have expired turn the key off and wait about 3 seconds and then your car should start. hope this helps.
The alternator is not charging,or the battery wont take a charge.If all accessories work fine when its running after you've boosted it,its likely the battery.
John
Try under the dash, attached to colum is a switch that the rod goes into from your ignition key switch, that may need to be adjusted tword your steering wheel just a touch, they go out of alignmnet from time to time
After you replace the ignition switch turn the key to start the car and release leave the key were it stops after trying to start wait 10 minutes until security light goes out turn key to full off position then repeat the above procedure two more times for a total of three on the 3rd attempt to start car wait for light to go out then turn key to full off positoion wait 10 seconds then try to start car body control module should learn new pass code and the car should start.
Big john, J@J Automotive
Are you reffering to the alarm or the pass lock system that put the theft light on.....If its the alarm the put the key in the door and unlock it. If its the pass lock system put the key in the ignition and turn it on and try to start the vehicle. After it shuts itself off leave the key on for ten min until the theft light stops flashing the turn key off and try to start it again. This may take a few times....
Leave the key in the on position for 20 to 30 minutes without trying to start the vehicle. In most cases a lose of power to the computer has happened and the security must be reset.
×