I am not sure where to plug in the heated leather seats in my 2004 hyundai santa fe. i got the seats out of a 2005 santa fe. I pluggedthem in to the white connector underneath the passenger front seat, but there seams to be no power to the seats.
Not sure what to do
SOURCE: 2007 hyundai santa fe
There is a sensor under the seat cushion that is basically a weight sensor, if a certain weight is not sensed then the airbag is turned off, it must be defective.
SOURCE: leather seat problem
You can check with a local trim shop they can get the material for you, your dealer can also give you a name of one that carries or has access to the seat material for your model
SOURCE: hi my double seat on my hyundai santa fe won't go down
there might be an interior panel not clipped in all the way at some spot, gently beat on the bottom edge and top edges of all the trim surrounding the mounting brackets, also the catch might not have been placed correctly during assembly. No idea why but I had 2 hyundai's and a Kia Magentis/optima (suprisingly nice for a kia...) with loose body trim or a trunk catch not quite right (yay seeing one side of the hood lift and shake when you're cruising the roads). Just take a good luck at what you can s3ee, gently tap on the plastic trim edges, and maybe see the dealer about reinstalling the catch (usually free)
Testimonial: "thanks, i've tried what you have suggested and it still won't budge, think it's the dealer as a next stop. really appreciate you coming back so quickl"
SOURCE: hyundai santa fe 2004 how can i install two front seat,
2 bolts in each of the seats' floor rails... total of 8. Wire harness connectors may not be the same power seat control harness, seat heaters, etc. Research of connectors shows floor harness connectors are identical between 04 & 05. However, optional features like seat warmers in the wire harness of the 05 model may not exist in the other and vise versa.
119 views
Usually answered in minutes!
×