1993 buick skylark w/ 3.3 V6. Died at stop sign.(tank 3/4 full) Cranks but won't run..unless you use starting fluid. Checked fuel pump and filter and ECM all good. Need to check Ohms on fuel injectors. If no power is getting to the injectors but the ECM is good what would cause this issue? I heard power comes thru oil pressure switch, Is this true for the 3.3 liter V6?
Could be the senser even though you have pressure at the dash gauge
The ECM gets it's information from various sensors like throttle position sensor, mass air flow sensor etc. I suggest you test all of those to figure out which one or ones are defective and replace them.
You have 35 psi of fuel pressure and injection pulse?
440 views
Usually answered in minutes!
and ?
and ... what? what are you "anding" about
×