At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How much and how long to repair and replace a power...
At dealer 1 hour min. charge plus part. hose is not a high pressure hose so should not be much maybe $5.00 for hose. don't know what dealers charge nowadays. call them and ask the service manager.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This could be caused by the deterioration of this small flexible coupler located in the steering column. The good news is you don't need to have the entire steering column or intermediate shaft replaced as most people think. This tiny, $2.00 flexible coupler and two hours of labor could be the answer to your problem.
Nov 25, 2015
Check the attached links,similar models to yours power steering belt replace.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Dec 29, 2015 - replace left front fender - Hyundai Motor 2003 Elantra question. ...Question about Hyundai Motor 2003 Elantra. Open Question ... How do i remove left front fender clip on a Lincoln ls 2002? Jan 04, 2015 ' 2002 Lincoln LS.
Mar 26, 2013 - Question about Hyundai Motor 2003 Elantra. Open Question.Replace 2003 hyundai elantra front passenger outside door handle. Need to replacebroken exterior door handle on front passenger .... replace left front fender.
open the oil return to the reservoir and drain out the wrong oil. refit the hose and refill with the right oil . run and turn the wheel from lock to lock to remove air and old oil. remove the hose again and repeat the process several times until clean oil comes out the return line . Refit the hose and fill with the correct oil.
Take the car to Autozone or purchase a scanner and scan it for codes. Then do the repair and use the scanner or return to Autozone and have them turn off the light.
Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133
×