Ignition wiring diagram

copy and paste

https://www.autogenius.info/ford-ranger-1999-fuse-box-diagram/

https://www.therangerstation.com/tech/1998-2000-ford-ranger-fuse-box-diagrams/

https://www.justanswer.com/ford/0pjmk-1999-ford-ranger-xlt-fuse-panel-diagram.html

" this radio "?? The one that only you can see?

Generally the harness plug would fit all modern Fords. If not you adapt.

Ford Ranger Radio Wiring Diagram

https://www.therangerstation.com > tech_library > radio...
But what if your Rangers harness is missing the radio plugs at the end of the wires? Ford doesn't use the same color wiring in all applications but there ...
Wire Color: Used For
Lt Blue/Red: Illumination
Black/Pink: Fused Ignition
Black: Ground

2003 Ford Ranger Car Stereo Wiring Schematic

https://www.modifiedlife.com > 2003-ford-ranger-car-s...
If you want to know how to change your radio in your 2003 Ford Ranger or figure out why your car radio stopped working, a 2003 Ford Ranger radio wiring diagram ...

After Market radio install issues - Ranger-Forums

https://www.ranger-forums.com > after-market-radio-in...
Mar 23, 2021 - My daughter (16yo) has a 2003 Ford Ranger Edge. ... cut the original wire harness off and started connecting the corresponding wires based on the diagrams.
Wiring Colors - Ranger-Forums - The Ultimate Ford Ranger ...
Apr 26, 2017
Radio Harness Plug Diagram? - Ranger-Forums
Apr 28, 2017
Rear Speaker Wiring - Ranger-Forums - The Ultimate Ford ...
Nov 16, 2018
Aftermarket Radio Install - Ranger-Forums - The Ultimate Ford ...
Sept 25, 2021
More results from www.ranger-forums.com

Check autozone.com and create an account for net use. Then you can check most simple things. Or visit an auto parts store , most have the wiring diagrams for ignition wires readily available in order to sell them.

1999 Ford Ranger Vacuum hose diagram
Pamela, Normally vacuum line routing can be found under the hood of truck, on Rad support or on the underside of hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger Engine Vacuum Hose Diagrams
Vacuum Lines The Ranger Station Forums
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

More important than the length is the routing of the wires to reduce chances of cross-feeding of the ignition pulse into another wire.
Don't know if any place shows the routing of the plug wires.. You may need to look at another engine like yours to see how the wires are routed and which length wire goes where. Good luck.

On this website you find fuse box diagram and description for Ford Ranger 1999

https://www.autogenius.info/ford-ranger-1999-fuse-box-diagram/

http://electricwiringdiagram.com/ford-ranger-ignition-wiring-diagram-28l-and-29l-engine.htm

if u can gain access to the ignition switch wiring use a testlight and probe each wire while turning the ignition at start position.one of these wires shld have power during starting position and release it again to confirm.this wire goes directly to the trasmission multi lever position swicht (mlp).this MLP is mounted just outside the transmission shifting lever ganged together.Trace the corresponding return wire using the testlight. You may need someone to help you do the job.The return wire usually go to a relay on your fuse box on the engine compartment.Then from relay to the starter.

1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System

I have wiring diagram. Respond with your email address or fax number and I will sent it to you.