At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: 03 GMC Envoy the abs light stays on. The pads and...
Have your ABS Wheel Sensor checked, it is mounted on the hub of your axle. it could have gotten dirt on it or it is bad and it is not giving a signal to the ABS Module.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Warped front rotors from over using the brakes, heat from hard braking.........replace the front rotors with new ones and re-try. Might as well do the pads too as you are right there.
Hey Stan the man,need your vehicles info.,year,make,model and engine size and Tommy on the spot here will send you a picture diagram of your rear brake assembly.There's a special spring tool you can get at auto parts store to remove and install springs,me got one.
You may have a defective line on the right front brake. GM had a batch of bad lines installed on several year models. I had one collapse on mine with the caliper closed and burned my caliper, rotor and pads. Try to disconnect the metal line further back at the equalizer and see if you get fluid there. If you do replace line.
Did you replace the rotors or at least have them machine ground to true? Out of round or warped rotors will do this. It's a pain I know but rotors should be replaced or ground to true everytime new brake pads are installed.
I hope my suggestions helps and all the luck to you.
burdfrenzy http://stores.ebay.com/Pittsburgh-Joes-Pants-Nat
IF you installed the wrong brake rotors,without the ABS reluctor ring[if equipped],the light will come on.Second possibility is you damaged the ABS wiring to the wheel speed sensor.There is a harness to each wheel.
You really need to have it scaned by someone with propre equiptment. If it is a body module it will be around $500 for the part. Then it will have to be programed at a dealer. Really before you spend that much get it checked by a shop that knows computer systems. Good Luck
I have used Wagner brake pads for several years and have good good luck with them...I think they are called the Thermo Quiets. i tried a house brand and they were noisy and created alot of brake dust.
×