Stages and torque settings 2000 hilux diesel with a 1kzte motor with aluminium head
SOURCE: Head Bolt Torque for a 2000 Grand Cherokee Laredo 4.0L
the torque is a 4 step process
1 torque all bolts to 22 ft/lbs
2 torque all bolts to 45 ft/lbs
3 recheck all bolts to 45 ft/lbs
4 torque bolts 1 thru 10 to 110 ft/lbs
bolt 11 to 100 ft/lbs
bolts 12 thru 14 to 110 ft/lbs
bolt #1 is the fourth bolt from the front on the passenger side....#2 is the fourth bolt on the drivers side then you continue in a clockwise order
SOURCE: require ford escort rs 2000 1976 torque settings head bolts
2lt overhead cam with them horrible tappet adjusters,cast iron head but valves dont hit the head if the timing belt breaks ,but it does on the 1600 .called a pinto in america .Remember the assembly line well ,have many a fond memory of working on it and the staff canteen on night shift ,what lovely grub we got.Head bolt torque is about 80lbs because i used to pull them down to check them after the machine had tightened them up
SOURCE: how to unbolt torque converter on a 1kzte engine
there is a cover at the bell housing of the gearbox! remove its bolt then access the thin fly wheel! there are bolts that attach it to the torque converter! remove all as you rotate the fly wheel! pretty simple!
262 views
Usually answered in minutes!
×