Question about 2001 Acura Integra
Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.
btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and the ignitor. The bulbs usually start to loose their color long before they burn out. The inverters/ballasts either go out after a while or take a while to start up.
Before you spend money on a new bulb, try swapping it with the one on the other side. You'll need a security torx screwdriver to get the covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.
If the problem stays on that side, try swapping the ignitors. They're mounted inside the black covers.
If the problem is still on that side you've got a bad inverter. They're mounted on the bottom of the headlight assembly. You'll need to remove the front bumper and remove the headlight assembly to get to it. (I recommend you take pictures as you remove things so can put them back together correctly.)
Posted on Jan 05, 2009
it is at the rear bottom of engine, points inside the bell housing of the transmission, u will need to jack the car off the ground to see it and get at it for repAIR
Posted on Feb 28, 2009
Right on the driver's side...end of the dashboard...the left side of your knee when you open the door.
The other one is in the engine compartment....it is marked with "FUSES". It is located in front of the positive battery "jump" terminal, driver's side.
Posted on Mar 19, 2009
Tips for a great answer:
Sep 22, 2018 | Acura Cars & Trucks
Sep 10, 2014 | Cars & Trucks
Sep 14, 2012 | 2000 Acura TL
Nov 03, 2011 | 2000 Acura TL
Oct 22, 2010 | 2000 Acura TL
Aug 21, 2009 | 1997 Acura TL Series
1,084 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: