- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Generally speaking, the flashing light means the system is not functional. The problem could be one of the pressure sensors, the ac clutch, or various other electrical components.
they do not make a separate belt for NON AC belt, there is just one belt, the cars without the AC have a AC bypass pulley installed where the AC pump sits, u can buy a bypass pulley from a company called DORMAN, they sell their parts through most better retail auto parts stores like Napa and Carquest.
its the same. but a different pulley takes place of the a/c compressor. I know DORMAN makes a few "bypass pulleys" to do this, but dont know if they make one for your truck. at the worst... you will need to get a pulley and bracket from the dealer for a truck without a/c . as long as your a/c pulley bearing is ok, you can let the belt run there.
did it work before? why did you replace these items?did you evacuate and recharge it with the proper procedure and amount of 134a. is the pressure switch on the drier OK, it should have power to it. the switches are common to go bad. if you take the plug at the switch and connect the terminals (paper clip) the compressor should come on.
×