I have changed all light bulbs in the tail lights,...
I have changed all light bulbs in the tail lights brake lights and back up lights on my 1992 Toyota Corolla and they still won't work?the bulbs are all located in one light housing
for both sides of the car.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The steps to replace the brake light bulb on a 1996 Toyota Corolla:
The bulb needed is type 1157. After opening the trunk you need to remove the trunk liner on the side (right side for this example)where the brake light bulb is out. The plastic capture grommets hold the liner in place. Once the grommets are removed there is a nut (10mm) that is a bright brass-like color. This needs to be removed. Then on the outside of the trunk on the tail-light lens left side there are two nuts black in color (10mm) they need to be removed. Now the fun starts .... you needto slide the whole assembly back. You will note two black plastic posts on the rear quarter-panel, do not remove these ... these are used to hold the tail-light assembly in place since on the inside of the tail light assembly there are two rod-like protrusions that slide into these brackets. So.... remove the screws and wiggle the assembly back and it "should" slide back so that you can get at the bulb socket hat you twist to remove from the assembly. Now the bulb is visible and you reverse the order of steps to get it all back together .... a miserable design!
I would look for a wiring short in the trunk at the taillamp area, or, inspect the sockets for the taillamp bulbs for corrosion. In any case, you have a short circuit in the trunk area, also check the wire that comes from the body & goes up the trunk hinge on the driver side; that wire may be chafed, and it may be shorting out. Hope this helps; please get back to me if you need any further assistance.