I just need a small 7 pin wiring diagram to wire a plug

Here is a color diagram of the distributor plug for a 1997 Nissan Sentra GA16DE:
Pin 1: Black/White wire - Ignition pulse signal Pin 2: Green/Red wire - Ignition coil power Pin 3: Black/Yellow wire - Ground Pin 4: Blue/Yellow wire - Engine speed sensor signal Pin 5: Yellow wire - Power supply Pin 6: Green/White wire - Ignition coil signal Pin 7: Red wire - Power supply
Please note that wire colors may vary depending on the specific vehicle and wiring harness. It's always recommended to double-check with a wiring diagram or a professional mechanic before making any electrical connections.

Trailers with electric brakes need them too. The 7-Way Trailer Plug is around 2? diameter connector that allows an additional pin for an auxiliary 12-volt power or backup lights.
https://www.ajtnt.com/Info/7-Way-Diagram
Connect to the brake controller and route the black and blue wires. Find the blue wire that comes off of your electronic brake controller. Attach the blue wire that came with your 7-wire plug to this blue wire. Locate the rubber grommet that surrounds the interior wiring harness where it feeds through the firewall.
https://itstillruns.com/wire-7pin-trailer-plug-4811994.html

https://www.narva.com.au/resources/trailer-plug-wiring-diagram

https://www.narva.com.au/resources/trailer-plug-wiring-diagram

make a 5 pin plug ---- trailer wire ---- 7 pin socket
converter cable
5 socket 7 pin round plug
Pin 2 to pin 1 left turn wire yellow
pin 3 to pin 3 Earth return to body of car
pin 5 to pin 4 right turn wire green
pin 6 to pin 6 brakes light red wire
pin 7 to pin 7 Tail light Brown wire

if it is a rectangular 7 pin then
5 socket 7 pin rectangular plug
Pin 2 to pin 1 left turn wire yellow
pin 3 to pin 3 Earth return to body of car
pin 5 to pin 4 right turn wire green
pin 6 to pin 6 brakes light red wire
pin 7 to pin 7 Tail light Brown wire
refer to narva wiring diagrams to check
could use a 12v dc probe to sus out what the pins do.
might be able to buy a converter cable from a car spare parts shop maybe or make it yourself

Depends on plug type and number of Pins used.
Is it 5 pin or a 7 pin round plug or a rectangle plug ?

http://www.narva.com.au/products/browse/wiring-diagrams

hope this helps

6 pin socket

6 pin plug

7 pin socket

7 pin plug

5 pin socket

5 pin plug

7 pin socket

7 pin plug

7 pin socket

7 pin plug

7 pin socket

7 pin plug

12 pin socket

12 pin plug

small 6 pin round plug & socket

1 tail, clearance - brown

2 left hand turn - yellow

3 right hand turn - green

4 stop - red

5 electric brakes - blue

6 earth - white

small 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

round socket

large 5 pin round plug & socket

2 left hand turn - yellow

3 earth - white

5 right hand turn - green

6 stop - red

7 tail, clearance, side markers - brown

large 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

7 pin round heavy duty plug & socket

1 earth - white

2 left hand rear , clearance and marker - black

3 left hand turn - yellow

4 stop - red

5 right hand turn - green

6 right hand rear , clearance and marker - brown

7 reverse/auxilary - blue

7 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

flat socket

12 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

8 battery supply - orange

9 auxiliaries - pink

10 earth - white

11 rear fog lamp - grey

12 auxiliaries - violet

I am guessing you mean the 7 pin trailer tow adapter.

the 7 pin RV plug itself



The 2005 trailer tow adapter wire diagrams

If you are going from a 4 pin on your trailer to the 7 pin on the truck. You need to go to parts store or a department store (ex Wal Mart) and look in trailer section and find the adapter. Thats what I did. Also Remember if your lights don't work on trailer, check the plug to make sure its tight or check the fuse under your drivers side rear seat for that fuse box.

black socket, black 7 core wire
pin 1 yellow left indicator
pin 2 blue, rear fog light
pin 3 white earth
pin 4 green right indicator
pin 5 brown right side/tail light
pin 6 red brake lights
pin 7 black left side/tail light

Grey socket grey 7 core wiring
pin 1 yellow, reverse
pin 2 blue, supplementary feed (ignition)
pin 3 white, earth
pin 4 green live feed (battery +)
pin 5 brown not connected
pin 6 red supplementary feed (ignition)
Pin 7 black earth

On the discovery there is a purpose made plug behind the panel on the drivers side rear, behind the rear lamp
i think the relay you have bought is for lamp failure you just need a normal 4 pin 30 amp relay.
Good luck Davelee

I believe you can look up the manufacturer of the trailer plug kit and find the wiring diagram there. On alot of the trailer plug kits, they have pics and diagrams in the package. The 7 pin plug (truck side) is available with the pig tail set up that plugs directly into the wiring harness for the lights. Then all you would have to worry about is the 2 wires for the electric brakes.

Try this website www.kiatechinfo.com

This will be far more usefull than me just handing you the diagram