Question about 2000 Ford Mustang

1 Answer

2000 Mustang: which is the position for the wires for the sporck...

Which is the position for the wires for the sporck plug

Posted by Anonymous on

Ad

1 Answer

Patrick Rayome

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,757 Answers

For the 2000 Ford Mustang:
Based on your question you should have the 3.8L V6 and not the 4.6L SOHC or DOHC V8; however I have included all below.

For the 3.8L V6:
Firing Order:
1-4-2-5-3-6
Cylinders:
......(back)......
|..3..|.......|..6..|
|..2..|.......|..5..|
|..1..|.......|..4..|
......(front)
Ignition Coil Connections:
....(back).....
|..1...2...3..|
|..5...6...4..|-this is correct (564).
....(front)

For the 4.6L SOHC and DOHC:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
........(back).........
|...4...|......|...8...|
|...3...|......|...7...|
|...2...|......|...6...|
|...1...|......|...5...|
........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on May 19, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 v6 mustang backfires through exhaust at 2000 rpm


Could be many things, the most common being spark plug wires, or the plugs themselves. Or the cam, or valves or timing. Change the wires and plugs to start with, and see what happens.

Mar 11, 2013 | Cars & Trucks

1 Answer

2000 ford mustang electrical problems


You have a open connection somewhere,do you check the fuses especially the fuseable link at the positive battery post how about the power at the ignition switch it hot at all times,your disconnected somehow you might have to make a jumper wire to find what opened.

Mar 20, 2012 | 2000 Ford Mustang

1 Answer

My 1996 ford mustang v6 is losing power and missing under 2000 rpms ive changed the plugs wires and coil pack what else could it be


Hello and welcome to Fixya!

As a first course of action, I strongly suggest that you remove the positive batter connector and let it sit for atleast 5mins. before reconnecting it. This will reset the system and can get your vehicle back to it's normal operation.

Please do keep me posted on the progress. I'll be glad to help you out. Hope this helps and thank you for using Fixya! Have a good one!

Sep 01, 2011 | 1996 Ford Mustang

1 Answer

Need to replace plugwires on 2000 mustang


super easy, but remember that for some reason these cars have a habit with perfering the 5th and 6th plug wire to be switched around...runs smoother..and not doing any harm to your car

Jan 28, 2010 | 2000 Ford Mustang

1 Answer

How do u get to upper starter bolt on 4.6l on 2000 mustang gt


  1. Disconnect the battery ground cable. For additional information, refer to Section 414-01 .
  1. Raise and support the vehicle. For additional information, refer to Section 100-02 .
  1. Remove the red starter solenoid safety cap.
  1. Remove the starter solenoid nuts and position aside the wires.
  1. NOTE: To ease removal, remove the upper, concealed bolt first.
    Remove the three starter motor bolts.
81b30f9.gif
  1. Remove the starter motor.

Nov 01, 2009 | 2000 Ford Mustang

1 Answer

1996 Cobra Mustang surging or loping wont run right, missing


You should check the engine coolant temprature sensor (ECT).

May 31, 2009 | 1997 Ford Mustang Cobra

1 Answer

My gas gauge is stuck on full in my 2000 ford mustang


You will need to locate the wire to the fuel sending unit at the fuel tank.

Once you locate the wire, disconnect it and see if the guage goes to 'E". If the guage goes to "E", you probably have a bad sending unit.

To double check, ground the same wire to clean metal on the frame with the key in the "on" position (not running). If the guage does not move, the guage is bad. If the guage moves from E to F, the sending unit needs to be replaced.

Apr 11, 2009 | 2000 Ford Mustang

1 Answer

Will changing newe plugs and wires help on lesser gas fills


replace plugs every 24000 miles or so(two years) buying good quality parts is another good idea. shop around, cheap parts are cheap for one reason. regular tune ups will help your car run and perform better. being easy with the gas pedal will help also

Feb 24, 2009 | 2000 Ford Mustang

Not finding what you are looking for?
2000 Ford Mustang Logo

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...