- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
does the diagram of the belt routing on the core support say one with ac and one w\o ac? if so autozone can tell u, if not, they may tell u that you need to replace the ac compressor, or buy some thing that re routs it. you can also try to remove the compressor, that way its out of the way, and take a string, run it as it would go, and measure the string, that will tell u what size belt to get
if ur looking for chime alert then at fuse panel is a round plastic chime that may be disconnected or needs replacement--if your looking for dash light then possible light is burnt or wiring problem under dash--
You can not tighten the belt, it is held on by the Belt tensioner...it's located a little to the left side of the waterpump...now it maybe getting weak, or your belt may need to be replaced...Sometimes they look good, with no cracks, but they get worn and streched out over time..or it may look shiny..either one of those will cause it too squeak..
no... the 97 crown vic has a timing chain not a timing belt...it involve 7.4 hrs book time to replace with gears ...parts to include front gaskets and timing kit about 200+ in parts and at 75 an hr ..555 in labor..guessing less than 1k to do the job ..(here in california)