2001 Windstar: how to install a fule pump...

Ford Windstar Fuel Pump Wiring Diagram Ricks Free Auto Repair Advice

could be coil or possibly the crank sensor

down to check tap with screwdriver it should click wit a spring sound. must b pressed down to engage fuel pump

to install the power steering pump you first must have a pulley pulling tool. most part stores will lend you this tool if u purchase the part.after removing the pulley theres usually three bolts in behind it.take them and both power steering lines off.Its fairly simple process.

Check the fule pressure regulator. This part brings down the fule pumps psi.

There is a special tool for that. It should be available at most auto parts stores.

Probaly in the fuel tank

If your fuel pump is an in tank one then you have probably got the float stuck when you put it in the tank.
Let me know if this is the prob.

The fule tank vent tube is blocked/clogged. It's the little hole next to the filler hose that invites spiders that clog it up. Blow out the tube and it fixes the problem.