I need the timing markings for a 2006 jeep grand cherokee

You should have cylinder #1 at TDC, make sure the timing marks line up exactly then you just throw your belt on and you're good to go. You can't mess this up, the marks are clearly visible

need timing belt diagram for a 1998 Jeep Cherokee Classic

Hi there,

Not quite sure of your question....

From 1987 onwards, the timing on Jeeps is controlled by the Powertrain Control Module (PCM) and is not adjustable.

If you have a more specific question relating to camshaft sprocket alighment or timing belts, please re-post your question for an Expert to answer.

Click over image for zoom...

Fig. 3: Camshaft and injection pump timing marks aligned

Feel free to contact uc if you need aditional details or some specific section of the Grand Cherokee Service Manual

Hope helps.
Hope helps.

Hi,
Yes, the wiper is a two piece wiper. Can not be bought at Walmart.
One piece is bolted to the Jeep. The other section has the wiper attachted.
You have to get this at the Jeep dealer or on line. The complete wiper assembly is about $38.00 or $17.00 for the wiper, with the broken tip.
I have a 2006 Grand Cherokee and that happen to me also.
Jeff

The seat belt does not work on an ignition locking device. Need to remove side panel and visually inspect roller and gear locking mechanism.

This is marked as a acc fuse should have a 40 amp fuse in it

Are you sure you had the timeing marks lined up properly and the tentioner tight.

Needs to be done with a scaner . Autozone has this and they can reset it for free.

you have to get to the seat anchor bolt and remove it to take the tension off the seat belt and fold the seat up then it should come loose and you can pun the bold back in