Replace a timing belt on a 2000 Mazda Protege
SOURCE: 2003 Mazda Protege auto.62000km when should I replace timing belt
Anywhere from now to 80,000.
SOURCE: Replacing 2 belts on a 2000 Mazda Protege
I recommend that you go to any Auto Parts store and by a repair user manual for your 2000 Mazda Protege. They have pictures and arrows and stuff that you will need to do the whole job. The non-Mazda version will cost approximately $15.00.
Because of the tensioner that may come off when while you are doing these belt changes, it is too complicated to talk you through this.
But with the manual, I am confident you can change them.
SOURCE: 2002 Mazda Protege timing belt replaced and
Scan PCM for codes. Check that timing is correct again.These DOHC engines are easy to install a tooth out. Start from the top of engine when installing timing belt on this type of engine it's the easiest way to do it. If you took CRANKSHAFT pulley apart make sure the pick up ring behind isn't placed in backwards.
SOURCE: waterpump/alternator belt keeps breaking on 2000
do you have a siezed tensioner pulley that could do it . remove the serpentine belt and check the idler puller, then the alt if it's siezed , the water pump pulley should turn freely also check what is siezed and making the belts squeel something's not turning.
1,705 views
Usually answered in minutes!
×