At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
It is inline with the air intake .They are typically held in the tubing with hose clamps and a 2 or 3 wire connection. Make sure you check for direction of air flow.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
An O2 sensor problem will not cause any drive related symptom. I would look at the Mass Air flow sensor and have the fuel pressure checked under a load to make sure it is within specs.
Is the check engine light on.. If so lets get the codes and go from there. Autozone provide this as a free sevrice. and they also rent the tool . It could be many things mass air flow sensor ,, Throttle body..Good luck!!!
the mass air flow sensor is located under the top plastic engine cover. to remove this un screw the oil filler tube by hand and remove the top cover. its just to the right of center engine. unplug this sensor. next it has two screws to take this off. It is not standard screws so look at it. remove them and replace sensor. After install go to autozone and have the warning code removed. This is done free. 2000 buick lesabre
The M.A.S. is in the top of the metal tube between the air filter box and the intake manifold. It will have a wire connected to it and it is held in by 2 screws. This is an easy replacement and should take no more than 5 to 10 minutes, assuming you are taking your time.
sound like the mass air flow sensor is dirty. take it off and clean with mass air flow cleaner and let it dry before putting it back in and try. it should be located in the air intake hose or the throttle body. also could be map sensor.
×