Question about 1999 Jaguar XK8

1 Answer

My drivers seat backrest will not operate, it operates in the down moition.All the other operational buttons work ie forward/backward, lift up /drop down but not the back rest, is there any way of bypassing the problem to reset the seat to the position I require until I can get to a jaguar garage. I dont know if this is a relay problem or not. thanks mike

Posted by mike_hartnel on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Switch the control module with the other seat. I had the same issue and found it was just a bad relay in the module.

Posted on Jun 15, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford 2008 expedition, power drivers seat won't recline, but everything else works.


Power Recliner
The driver seat has an electro-mechanical backrest adjuster. The backrest adjustment switch is located on the side of the seat cushion side shield and is part of the seat control switch. The recliner motor is mounted to the backrest frame. Power recliners and motors are only serviceable by installing a new backrest frame assembly.
Does yours have Driver and Passenger Power Seats Without Memory Or Power Driver Seat With Memory ?

B1666 Seat Driver Recline Motor Stalled On-Demand If the motor does not operate, Go To Pinpoint Test L . If motor operates, Go To Pinpoint Test M . Take it an have it check !
Does your

May 15, 2016 | Ford Cars & Trucks

1 Answer

What is wrong when the electric driver seat in a 1995 ford mustang will not move forward or backward but will move up and down.


check switch for proper operation //check motor control for power ,connections and wires are not damaged or disconnected===check seat track for debris or something stuck

Aug 11, 2015 | 1995 Ford Mustang

1 Answer

Remove rear seat


Rear seat cushion-fold forwards,release plastic clip from hinge,remove wiring multiplug if applicable.Lift out cushion.(40% backrest)Tilt forward approx 20degrees,use a screwdriver to release catch retainer on outer pivot pin.lift backrest and withdraw from inner pivot pin.Lift the backrest from inside vehicle.(will only lift out if backrest is tilted forward 20degrees from verticle. 60% section can then be removed on saloons by releasing the lock with a finger and pulling from the anchor pins.On estates unscrew centre seat belt lower mounting and unscrew hinge pin from centre support. unhook upholstery clip and lift backrest from lefthand side mounting.slide backrest towards the door to release centre pinlug and withdraw backrest from inside the vehicle. Refit in reverse order.

May 22, 2015 | 1999 Saab 9-5

1 Answer

My 1999 Toyota Avalon power seat only moves forward but not backward.


Try unbolting the seat, lift it up, operate the motor and once u find the motor you are looking for apply 12v to one wire and ground to other going to motor... If it moves forward switch the polarity and see if it operates the other way verifying the motor is functioning well. While there check for power from the switch

Oct 21, 2013 | Cars & Trucks

1 Answer

Hi everyone I own a CLK200 Kompressor 2002 model. I have the following problem, driver seat moving forward when pressing backward function on the power seat button. I already checked the fuse in the trunk...


First try as fallow, get in to the seat, then keep tight your foot on floor and give a good press backward to the seat and operate the seat switch towards back, just release and do it again keep going that way it will start to move back words, if it start to move do it few time and do it every time you get in to the car at least two time per day continue it for one week, It will be OK otherwise need chassis no for more information,

Nov 12, 2010 | 2000 Mercedes-Benz CLK

1 Answer

Driver,s seat no longer slide forward and backward


Check for obstuction on seat track or try listening to see if you can hear seat motor operating. if you can't hear motor operating check fuse.

Mar 21, 2010 | 2004 Nissan Murano

2 Answers

We cannot remove 2nd seat in our 02 Kia Sedona. We


move seat completely back.take off head restraint,tip backrest forward flat to seat, then, grab the pull cord and pull backward so that seat tips forward then grab bars on front of underseat and squeeze together and lift.be careful these seats ARE HEAVY.

Feb 22, 2010 | 2002 Kia Sedona

2 Answers

Hai i would like to know how to fold the back car seat to increase cargo space in hyundai santa fe 2003


The rear seats have a pull strap located between the bottom cushion and the backrest of the rear seats used to disengage a lock to lift up the bottom cushion. The pull straps will only stick out an inch or so, or they might have fallen down between the seats and then you wont see them. Before you can lower the backrest of the rear seats, the bottom cushions have to be lifted up and forward out of the way so that the backrest may lie down flat. If your pull straps are not visible between the bottom cushion and the backrest, you may have to stick your hand between the cushions and feel for the straps. Once you find the straps, pull upward on the while lifting on the bottom cushion where the pull strap is located and the seat should tilt forward. Once you have manged to do this, the lever for the backrest is located on the top of the backrest. Just slide the lever and tilt the backrest to the desired position.

Apr 13, 2009 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
1999 Jaguar XK8 Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...