Question about 2002 Ford Escape

1 Answer

Jsut want to know where crankshaft position sensor

Just want to know where crankshaft position sensor is on 2002 ford escape and what it looks like

Posted by jayydogg23 on


1 Answer

Rene J Solis

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers


here are illustrations of the CKP (crankshaft position) sensor in 2.3L and 3.0L.

Note: In the bottom of the 2.3L drawing says Trottle Position (TP) Sensor, this is wrong, It should say CKP Sensor.

2.3L Engine

The Crankshaft Position (CKP) sensor is located to the left of the crankshaft pulley.

jsut want to know where crankshaft position sensor - 0996b43f80202990.jpg enlarge_tooltip.gif Fig. Crankshaft Position (CKP) sensor location-2.3L engine

3.0L Engine

The Crankjsut want to know where crankshaft position sensor - 0996b43f8020299e.jpg sensor is located just behind the crankshaft pulley on engine block.

0996b43f8020299e.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Crankshaft Position (CKP) sensor location-3.0L engine

The cost of the sensor is $23 bucks at AutoZone.

If helpful, click below

Posted on Apr 15, 2010

  • KISHOR MODI Apr 23, 2013

    thank you.I will tell my mechenic.



Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2006 ford escape v6 shuts off on me going down the road at 45 mph anyone know what it might be please help me

Could be a lot of thing's , engine sensors - crankshaft position sensor , cam sensor , or PCM engine computer .Does it start right back up ? Videos on you tube for testing crank an cam sensors ! Is the check engine light on ? Have vehicle checked for DTC'S - diagnostic trouble codes .

Oct 15, 2016 | Ford Cars & Trucks

1 Answer

2003 ford escape run sometimes but when it wont start their no spark

best have vechicle code scan could have faulty crankshaft position sensor or camshaft position sensor.could have fault PCM.replace spark plugs and wires see what happens.

Feb 11, 2013 | 2003 Ford Escape

1 Answer

02 ford taurus crankshaft position sensor location

Its located in the front of the engine mounted to the timing cover near the crankshaft pulley.

Oct 29, 2012 | 2002 Ford Taurus

1 Answer

Where is the crank position sensor located on the 2002 Ford Escape? Will I need a rubber O ring or paper spacer?

The Crankshaft Position Sensor (CKP):
4 CYL - located on the front of the engine, near the flywheel end of the block. remove exhaust manifold, disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 62 inch-pounds
6 CYL - located next to crankshaft pulley - remove right wheel, remove lower right splashshield. disconnect electrical connector, remove bolt. installation is reverse of removal, no gasket req'd. torque to 89 inch-pounds

Dec 17, 2010 | 2002 Ford Escape

1 Answer

2002 ford escape about two weeks ago started having trouble starting would turn over but would not start you had to turn it over 3 or 4 times before it would start then no more trouble the rest of the...

depending on your knowledge of the vehicle check the crankshaft sensor, and the fuel pump relay. see in you are getting spark to the plugs.

Sep 29, 2010 | 2002 Ford Escape

1 Answer

How do i install a crank angle sensor on my ford 1997E250 4.2L V6

FREE FROM ME TO YOU!!! I HOPE THIS HELPS YOU!! Sensor, Crankshaft Position (CKP) Removal
  1. Raise and support the vehicle.
  1. Remove crankshaft position sensor (CKP sensor) (6C315).
    1. Disconnect the CKP sensor electrical connector.
    1. Remove the (A) CKP sensor shield nuts and the (B) CKP sensor shield.
    1. Remove the (C) CKP sensor bolts and the (D) CKP sensor.

fc50791.gif Installation
  1. Install crankshaft position sensor.
    1. Position the CKP sensor.
    1. Install the bolts.
    1. Position the shield.
    1. Install the shield nuts.
    1. Connect the electrical connector.


Mar 25, 2010 | 2002 Ford E250

1 Answer

Where is the crank sensor located on a 2003 ford escape

2.0Liter engine is
Crankshaft Position Sensor Notes View 151-6 102969750
On a 3.0 Liter engine

Crankshaft Position Sensor Notes View 151-3 102969749
Hope this helps

Dec 11, 2009 | 2003 Ford Escape

1 Answer

Ineed to know the location of the cam sensor on a ford escape 2002 with the 3.0 liter V6 DOHC

SECTION 303-14: Electronic Engine Controls 2002 Escape Workshop Manual REMOVAL AND INSTALLATION Camshaft Position (CMP) Sensor —3.0L (4V) Removal and Installation
  1. Remove the camshaft position (CMP) sensor.
    1. Disconnect the electrical connector.
    1. Remove the bolt.
    1. Remove the sensor.
#56 is the cam sensor. please rate as fixed if this is what you need.


May 02, 2009 | Ford Escape Cars & Trucks

1 Answer

Car dose not start after installing timing chains

You didn't by chance hit or move crankshaft position sensor when doing other work. (Behind crankshaft pulley)

Jan 22, 2009 | 2002 Ford Escape

Not finding what you are looking for?
2002 Ford Escape Logo

2,727 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides