Just need the torque secuence in the accent 2001 for the cylinder head bolts

'year make model' in all questions please. Question edited and moved to Hyundai Accent.

In the link

https://www.google.com/search?q=H100+cylinder+head+bolts+torque

..

Tighten the cylinder head bolts. Tighten the cylinder head bolts is sequence to 29 Nm (3.0 kgf-m, 22 ft. lbs.). Use a beam-type torque wrench. When using a preset type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it. Make sure the threads are clean, new heads bolts are best.

Click on the images Rusty Weeks.

https://www.google.com/search?q=2001+hyundai+accent+cam+cap+bolt+torque&rlz=1C1QJDB_enCA643CA644&sxsrf=APq-WBviGncM0J5PLYMinrCZpHab3F9gRg:1646440009074&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiJwon_2q32AhUJmHIEHV2pAPwQ_AUoAnoECAEQBA&biw=1920&bih=937&dpr=1

..

TORQUE ALL BOLTS PROPER SEQUENCE TO 14 FT LBS.THEN PAINT MARK ON THE OF EACH BOLT.USING MARK AS A REFERENCE TIGHTEN ALL THE BOLTS PROPER SEQUENCE AN ADDITIONAL 90 DEGREES.THEN TIGHTEN ALL BOLTS IN SEQUENCE ADDITIONAL 90 DEGREES. WRITE THIS NUMBER ON A PIECE OF PAPER. 8 4 1 5 AND UNDER THAT NUMBER WRITES THIS NUMBER UNDER THE NUMBER JUST GAVE YOU 7 3 2 6 THIS IS YOUR CYLINDER HEAD BOLT TORQUE SEQUENCE.

cylinder head bolts 52-55 ft lbs. engine cold 59-63 ft lbs. engine hot

rocker arm shaft bolts 15-20 ft lbs.

intake manifold bolts 11-15 ft lbs.

exhaust manifold bolts 22-30 ft lbs.

valve cover bolts 79-81 in lbs.

Here's what the shop manual states:

30 Nm (300 kg.cm, 22 lb.ft)+90°+Release all bolts + 30 Nm(300kg.cm, 22 lb.ft)+90° In this instance you don't have a 'Torque to Spec"... you have a "torque to YIELD' In this specification, initially torque the head bolts to 22 lb ft... then turn each and additional 90°, then loosen each and REDO to the same specification = 22 lb.ft)+90° (you're actually crushing the head gasket TWICE and stretching the head bolts TWICE.

1. The torque settings for the cylinder head bolts on a daewoo ...

   www.answers.com > ... > Categories > Cars & Vehicles > Asian Car i need how much pression (torque) for head daewoo nubira 2001 2.0 ... What is the cylinder head torque specs for a 2001 daewoo nubira 2.0 litre engine and ...

Are you aware that besides the torque, the cylider head bolts MUST be torqued in a specific sequence. The Ft/lbs of torque and the sequence are only available in the cars service manual or something similar like Chiltons repair manual. You can browse a copy of the Chiltons at a local library or bookstore and write down the ft/lbs and sequence. I've done it myself to save a few bucks

I need the torque settings and pattern for a Kia Sportage 2.2